Lines Matching +full:tx1 +full:- +full:0

3 For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
7  - compatible : Should be set to "ti,da830-musb".
9  - reg: Offset and length of the USB controller register set.
11  - interrupts: The USB interrupt number.
13  - interrupt-names: Should be set to "mc".
15  - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
17  - phys: Phandle for the PHY device
19  - phy-names: Should be "usb-phy"
21  - dmas: specifies the dma channels
23  - dma-names: specifies the names of the channels. Use "rxN" for receive
28  - vbus-supply: Phandle to a regulator providing the USB bus power.
32 - compatible: ti,da830-cppi41
33 - reg: offset and length of the following register spaces: CPPI DMA Controller,
35 - reg-names: "controller", "scheduler", "queuemgr"
36 - #dma-cells: should be set to 2. The first number represents the
37   channel number (0 … 3 for endpoints 1 … 4).
38   The second number is 0 for RX and 1 for TX transfers.
39 - dma-channels: should be set to 4 representing the 4 endpoints.
40 - #dma-channels: deprecated
43 	usb_phy: usb-phy {
44 		compatible = "ti,da830-usb-phy";
45 		#phy-cells = <0>;
48 		compatible = "ti,da830-musb";
49 		reg = <0x00200000 0x1000>;
51 		#address-cells = <1>;
52 		#size-cells = <1>;
54 		interrupt-names = "mc";
57 		vbus-supply = <&usb_vbus>;
58 		phys = <&usb_phy 0>;
59 		phy-names = "usb-phy";
61 		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
62 			&cppi41dma 2 0 &cppi41dma 3 0
63 			&cppi41dma 0 1 &cppi41dma 1 1
65 		dma-names =
67 			"tx1", "tx2", "tx3", "tx4";
70 		cppi41dma: dma-controller@201000 {
71 			compatible = "ti,da830-cppi41";
72 			reg =  <0x201000 0x1000
73 				0x202000 0x1000
74 				0x204000 0x4000>;
75 			reg-names = "controller", "scheduler", "queuemgr";
77 			#dma-cells = <2>;
78 			dma-channels = <4>;