Lines Matching +full:pre +full:- +full:calibration +full:- +full:data
1 # SPDX-License-Identifier: (GPL-2.0 OR MIT)
4 ---
5 $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Amit Kucheria <amitk@kernel.org>
22 - description: msm8960 TSENS based
24 - enum:
25 - qcom,ipq8064-tsens
26 - qcom,msm8960-tsens
28 - description: v0.1 of TSENS
30 - enum:
31 - qcom,mdm9607-tsens
32 - qcom,msm8226-tsens
33 - qcom,msm8909-tsens
34 - qcom,msm8916-tsens
35 - qcom,msm8939-tsens
36 - qcom,msm8974-tsens
37 - const: qcom,tsens-v0_1
39 - description: v1 of TSENS
41 - enum:
42 - qcom,ipq5018-tsens
43 - qcom,msm8937-tsens
44 - qcom,msm8956-tsens
45 - qcom,msm8976-tsens
46 - qcom,qcs404-tsens
47 - const: qcom,tsens-v1
49 - description: v2 of TSENS
51 - enum:
52 - qcom,milos-tsens
53 - qcom,msm8953-tsens
54 - qcom,msm8996-tsens
55 - qcom,msm8998-tsens
56 - qcom,qcm2290-tsens
57 - qcom,sa8255p-tsens
58 - qcom,sa8775p-tsens
59 - qcom,sar2130p-tsens
60 - qcom,sc7180-tsens
61 - qcom,sc7280-tsens
62 - qcom,sc8180x-tsens
63 - qcom,sc8280xp-tsens
64 - qcom,sdm630-tsens
65 - qcom,sdm845-tsens
66 - qcom,sm6115-tsens
67 - qcom,sm6350-tsens
68 - qcom,sm6375-tsens
69 - qcom,sm8150-tsens
70 - qcom,sm8250-tsens
71 - qcom,sm8350-tsens
72 - qcom,sm8450-tsens
73 - qcom,sm8550-tsens
74 - qcom,sm8650-tsens
75 - qcom,x1e80100-tsens
76 - const: qcom,tsens-v2
78 - description: v2 of TSENS with combined interrupt
80 - qcom,ipq5332-tsens
81 - qcom,ipq5424-tsens
82 - qcom,ipq8074-tsens
84 - description: v2 of TSENS with combined interrupt
86 - enum:
87 - qcom,ipq6018-tsens
88 - qcom,ipq9574-tsens
89 - const: qcom,ipq8074-tsens
93 - description: TM registers
94 - description: SROT registers
100 interrupt-names:
104 nvmem-cells:
106 - minItems: 1
109 Reference to an nvmem node for the calibration data
110 - minItems: 5
113 Reference to nvmem cells for the calibration mode, two calibration
116 - maxItems: 51
118 Reference to nvmem cells for the calibration mode, two calibration
121 nvmem-cell-names:
123 - minItems: 1
125 - const: calib
126 - enum:
127 - calib_backup
128 - calib_sel
129 - minItems: 5
131 - const: mode
132 - const: base1
133 - const: base2
134 - pattern: '^s[0-9]+_p1$'
135 - pattern: '^s[0-9]+_p2$'
136 - pattern: '^s[0-9]+_p1$'
137 - pattern: '^s[0-9]+_p2$'
138 - pattern: '^s[0-9]+_p1$'
139 - pattern: '^s[0-9]+_p2$'
140 - pattern: '^s[0-9]+_p1$'
141 - pattern: '^s[0-9]+_p2$'
142 - pattern: '^s[0-9]+_p1$'
143 - pattern: '^s[0-9]+_p2$'
144 - pattern: '^s[0-9]+_p1$'
145 - pattern: '^s[0-9]+_p2$'
146 - pattern: '^s[0-9]+_p1$'
147 - pattern: '^s[0-9]+_p2$'
148 - pattern: '^s[0-9]+_p1$'
149 - pattern: '^s[0-9]+_p2$'
150 - pattern: '^s[0-9]+_p1$'
151 - pattern: '^s[0-9]+_p2$'
152 - pattern: '^s[0-9]+_p1$'
153 - pattern: '^s[0-9]+_p2$'
154 - pattern: '^s[0-9]+_p1$'
155 - pattern: '^s[0-9]+_p2$'
156 - pattern: '^s[0-9]+_p1$'
157 - pattern: '^s[0-9]+_p2$'
158 - pattern: '^s[0-9]+_p1$'
159 - pattern: '^s[0-9]+_p2$'
160 - pattern: '^s[0-9]+_p1$'
161 - pattern: '^s[0-9]+_p2$'
162 - pattern: '^s[0-9]+_p1$'
163 - pattern: '^s[0-9]+_p2$'
164 - pattern: '^s[0-9]+_p1$'
165 - pattern: '^s[0-9]+_p2$'
167 - items:
168 - const: mode
169 - const: base1
170 - const: base2
171 - const: use_backup
172 - const: mode_backup
173 - const: base1_backup
174 - const: base2_backup
175 - const: s0_p1
176 - const: s0_p2
177 - const: s1_p1
178 - const: s1_p2
179 - const: s2_p1
180 - const: s2_p2
181 - const: s3_p1
182 - const: s3_p2
183 - const: s4_p1
184 - const: s4_p2
185 - const: s5_p1
186 - const: s5_p2
187 - const: s6_p1
188 - const: s6_p2
189 - const: s7_p1
190 - const: s7_p2
191 - const: s8_p1
192 - const: s8_p2
193 - const: s9_p1
194 - const: s9_p2
195 - const: s10_p1
196 - const: s10_p2
197 - const: s0_p1_backup
198 - const: s0_p2_backup
199 - const: s1_p1_backup
200 - const: s1_p2_backup
201 - const: s2_p1_backup
202 - const: s2_p2_backup
203 - const: s3_p1_backup
204 - const: s3_p2_backup
205 - const: s4_p1_backup
206 - const: s4_p2_backup
207 - const: s5_p1_backup
208 - const: s5_p2_backup
209 - const: s6_p1_backup
210 - const: s6_p2_backup
211 - const: s7_p1_backup
212 - const: s7_p2_backup
213 - const: s8_p1_backup
214 - const: s8_p2_backup
215 - const: s9_p1_backup
216 - const: s9_p2_backup
217 - const: s10_p1_backup
218 - const: s10_p2_backup
219 - minItems: 8
221 - const: mode
222 - const: base0
223 - const: base1
224 - pattern: '^tsens_sens[0-9]+_off$'
225 - pattern: '^tsens_sens[0-9]+_off$'
226 - pattern: '^tsens_sens[0-9]+_off$'
227 - pattern: '^tsens_sens[0-9]+_off$'
228 - pattern: '^tsens_sens[0-9]+_off$'
229 - pattern: '^tsens_sens[0-9]+_off$'
230 - pattern: '^tsens_sens[0-9]+_off$'
239 "#thermal-sensor-cells":
243 - compatible
244 - interrupts
245 - interrupt-names
246 - "#qcom,sensors"
249 - $ref: thermal-sensor.yaml#
251 - if:
256 - qcom,ipq5018-tsens
257 - qcom,ipq8064-tsens
258 - qcom,msm8960-tsens
259 - qcom,tsens-v0_1
260 - qcom,tsens-v1
265 - description: Combined interrupt if upper or lower threshold crossed
266 interrupt-names:
268 - const: uplow
270 - if:
274 const: qcom,tsens-v2
279 - description: Combined interrupt if upper or lower threshold crossed
280 - description: Interrupt if critical threshold crossed
281 interrupt-names:
283 - const: uplow
284 - const: critical
286 - if:
291 - qcom,ipq5332-tsens
292 - qcom,ipq5424-tsens
293 - qcom,ipq8074-tsens
298 - description: Combined interrupt if upper, lower or critical thresholds crossed
299 interrupt-names:
301 - const: combined
303 - if:
308 - qcom,ipq5332-tsens
309 - qcom,ipq5424-tsens
310 - qcom,ipq8074-tsens
311 - qcom,tsens-v0_1
312 - qcom,tsens-v1
313 - qcom,tsens-v2
317 - reg
322 - |
323 #include <dt-bindings/interrupt-controller/arm-gic.h>
324 thermal-sensor {
325 compatible = "qcom,ipq8064-tsens";
327 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
328 nvmem-cell-names = "calib", "calib_backup";
330 interrupt-names = "uplow";
333 #thermal-sensor-cells = <1>;
336 - |
337 #include <dt-bindings/interrupt-controller/arm-gic.h>
338 // Example 1 (new calibration data: for pre v1 IP):
339 thermal-sensor@4a9000 {
340 compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
344 nvmem-cells = <&tsens_mode>,
351 nvmem-cell-names = "mode",
360 interrupt-names = "uplow";
363 #thermal-sensor-cells = <1>;
366 - |
367 #include <dt-bindings/interrupt-controller/arm-gic.h>
368 // Example 1 (legacy: for pre v1 IP):
369 tsens1: thermal-sensor@4a9000 {
370 compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
374 nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
375 nvmem-cell-names = "calib", "calib_sel";
378 interrupt-names = "uplow";
381 #thermal-sensor-cells = <1>;
384 - |
385 #include <dt-bindings/interrupt-controller/arm-gic.h>
387 tsens2: thermal-sensor@4a9000 {
388 compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
392 nvmem-cells = <&tsens_caldata>;
393 nvmem-cell-names = "calib";
396 interrupt-names = "uplow";
399 #thermal-sensor-cells = <1>;
402 - |
403 #include <dt-bindings/interrupt-controller/arm-gic.h>
405 tsens3: thermal-sensor@c263000 {
406 compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
412 interrupt-names = "uplow", "critical";
415 #thermal-sensor-cells = <1>;
418 - |
419 #include <dt-bindings/interrupt-controller/arm-gic.h>
420 // Example 4 (for any IPQ8074 based SoC-s):
421 tsens4: thermal-sensor@4a9000 {
422 compatible = "qcom,ipq8074-tsens";
427 interrupt-names = "combined";
430 #thermal-sensor-cells = <1>;