Lines Matching +full:is +full:- +full:wired

1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/spi/spi-peripheral-props.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Peripheral-specific properties for a SPI bus.
11   be common properties like spi-max-frequency, spi-cpha, etc. or they could be
13   need to be defined in the peripheral node because they are per-peripheral and
19   - Mark Brown <broonie@kernel.org>
27         - minimum: 0
32   spi-cs-high:
37   spi-lsb-first:
42   spi-max-frequency:
47   spi-cs-setup-delay-ns:
49       Delay in nanoseconds to be introduced by the controller after CS is
52   spi-cs-hold-delay-ns:
54       Delay in nanoseconds to be introduced by the controller before CS is
55       de-asserted.
57   spi-cs-inactive-delay-ns:
59       Delay in nanoseconds to be introduced by the controller after CS is
60       de-asserted.
62   spi-rx-bus-width:
65       If 0 is provided, then no RX will be possible on this device.
70   spi-rx-delay-us:
74   rx-sample-delay-ns:
75     description: SPI Rx sample delay offset, unit is nanoseconds.
79   spi-tx-bus-width:
82       If 0 is provided, then no TX will be possible on this device.
87   spi-tx-delay-us:
91   stacked-memories:
92     description: Several SPI memories can be wired in stacked mode.
99     $ref: /schemas/types.yaml#/definitions/uint64-array
103   parallel-memories:
104     description: Several SPI memories can be wired in parallel mode.
106       act synchronously as each data word is spread across the
110       many busses as devices must be wired. The size of each chip should
112     $ref: /schemas/types.yaml#/definitions/uint64-array
116   st,spi-midi-ns:
118       Only for STM32H7, (Master Inter-Data Idleness) minimum time
123   - $ref: arm,pl022-peripheral-props.yaml#
124   - $ref: cdns,qspi-nor-peripheral-props.yaml#
125   - $ref: samsung,spi-peripheral-props.yaml#
126   - $ref: nvidia,tegra210-quad-peripheral-props.yaml#