Lines Matching +full:ports +full:- +full:offset2
7 - compatible:
10 Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
12 "qcom,soundwire-v1.3.0"
13 "qcom,soundwire-v1.5.0"
14 "qcom,soundwire-v1.5.1"
15 "qcom,soundwire-v1.6.0"
16 - reg:
18 Value type: <prop-encoded-array>
22 - interrupts:
24 Value type: <prop-encoded-array>
28 - interrupt-names:
34 - wakeup-source:
39 - clock-names:
44 - clocks:
46 Value type: <prop-encoded-array>
49 - #sound-dai-cells:
54 - qcom,dout-ports:
57 Definition: must be count of data out ports
59 - qcom,din-ports:
62 Definition: must be count of data in ports
64 - qcom,ports-offset1:
66 Value type: <prop-encoded-array>
68 data port. Out ports followed by In ports.
73 - qcom,ports-offset2:
75 Value type: <prop-encoded-array>
76 Definition: should specify payload transport window offset2 of each
77 data port. Out ports followed by In ports.
82 - qcom,ports-sinterval-low:
84 Value type: <prop-encoded-array>
86 Out ports followed by In ports. Used for Sample Interval
92 - qcom,ports-word-length:
94 Value type: <prop-encoded-array>
100 - qcom,ports-block-pack-mode:
102 Value type: <prop-encoded-array>
106 Out ports followed by In ports.
111 - qcom,ports-block-group-count:
113 Value type: <prop-encoded-array>
116 Out ports followed by In ports.
121 - qcom,ports-lane-control:
123 Value type: <prop-encoded-array>
126 Out ports followed by In ports.
131 - qcom,ports-hstart:
133 Value type: <prop-encoded-array>
135 SoundWire Frame, i.e. left edge of the Transport sub-frame
137 Out ports followed by In ports.
142 - qcom,ports-hstop:
144 Value type: <prop-encoded-array>
147 sub-frame for each port. Values between 0 and 15 are valid.
148 Out ports followed by In ports.
153 - qcom,dports-type:
155 Value type: <prop-encoded-array>
158 1 for simple ports
160 Out ports followed by In ports.
165 - reset:
167 Value type: <prop-encoded-array>
171 - reset-names:
190 compatible = "qcom,soundwire-v1.3.0";
194 clock-names = "iface";
196 reset-names = "swr_audio_cgcr";
197 #sound-dai-cells = <1>;
198 qcom,dports-type = <0>;
199 qcom,dout-ports = <6>;
200 qcom,din-ports = <2>;
201 qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
202 qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
203 qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;