Lines Matching +full:cpvdd +full:- +full:supply
7 - compatible : "wlf,wm8903"
9 - reg : the I2C address of the device.
11 - gpio-controller : Indicates this device is a GPIO controller.
13 - #gpio-cells : Should be two. The first cell is the pin number and the
18 - interrupts : The interrupt line the codec is connected to.
20 - micdet-cfg : Default register value for R6 (Mic Bias). If absent, the
23 - micdet-delay : The debounce delay for microphone detection in mS. If
26 - gpio-cfg : A list of GPIO configuration register values. The list must
31 - AVDD-supply : Analog power supply regulator on the AVDD pin.
33 - CPVDD-supply : Charge pump supply regulator on the CPVDD pin.
35 - DBVDD-supply : Digital buffer supply regulator for the DBVDD pin.
37 - DCVDD-supply : Digital core supply regulator for the DCVDD pin.
65 AVDD-supply = <&fooreg_a>;
66 CPVDD-supply = <&fooreg_b>;
67 DBVDD-supply = <&fooreg_c>;
68 DCVDC-supply = <&fooreg_d>;
70 gpio-controller;
71 #gpio-cells = <2>;
73 micdet-cfg = <0>;
74 micdet-delay = <100>;
75 gpio-cfg = <