Lines Matching +full:uniphier +full:- +full:ld20 +full:- +full:aio

1 Socionext UniPhier SoC audio driver
3 The Socionext UniPhier audio subsystem consists of I2S and S/PDIF blocks in
7 - compatible      : should be one of the following:
8 		    "socionext,uniphier-ld11-aio"
9 		    "socionext,uniphier-ld20-aio"
10 		    "socionext,uniphier-pxs2-aio"
11 - reg             : offset and length of the register set for the device.
12 - interrupts      : should contain I2S or S/PDIF interrupt.
13 - pinctrl-names   : should be "default".
14 - pinctrl-0       : defined I2S signal pins for an external codec chip.
15 - clock-names     : should include following entries:
16                     "aio"
17 - clocks          : a list of phandle, should contain an entry for each
18                     entry in clock-names.
19 - reset-names     : should include following entries:
20                     "aio"
21 - resets          : a list of phandle, should contain an entry for each
22                     entry in reset-names.
23 - #sound-dai-cells: should be 1.
26 - socionext,syscon: a phandle, should contain soc-glue.
27                     The soc-glue is used for changing mode of S/PDIF signal pin
28                     to Output from Hi-Z. This property is optional if you use
33 		compatible = "socionext,uniphier-ld20-aio";
36 		pinctrl-names = "default";
37 		pinctrl-0 = <&pinctrl_aout>;
38 		clock-names = "aio";
40 		reset-names = "aio";
42 		#sound-dai-cells = <1>;