Lines Matching +full:pll +full:-

8   - compatible : One of "ti,pcm5121", "ti,pcm5122", "ti,pcm5141",
11   - reg : the I2C address of the device for I2C, the chip select
14   - AVDD-supply, DVDD-supply, and CPVDD-supply : power supplies for the
19   - clocks : A clock specifier for the clock connected as SCLK.  If this
20     is absent the device will be configured to clock from BCLK.  If pll-in
21     and pll-out are specified in addition to a clock, the device is
24   - pll-in, pll-out : gpio pins used to connect the pll using <1>
26     given pll-in pin and PLL output on the given pll-out pin.  An
27     external connection from the pll-out pin to the SCLK pin is assumed.
28     Caution: the TAS-desvices only support gpios 1,2 and 3
36 		AVDD-supply = <&reg_3v3_analog>;
37 		DVDD-supply = <&reg_1v8>;
38 		CPVDD-supply = <&reg_3v3>;
46 		AVDD-supply = <&reg_3v3_analog>;
47 		DVDD-supply = <&reg_1v8>;
48 		CPVDD-supply = <&reg_3v3>;
51 		pll-in = <3>;
52 		pll-out = <6>;