Lines Matching +full:debounce +full:- +full:ms
6 - compatible : Must be "nuvoton,nau8824"
8 - reg : the I2C address of the device. This is either 0x1a (CSB=0) or 0x1b (CSB=1).
11 - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low.
13 - nuvoton,vref-impedance: VREF Impedance selection
14 0 - Open
15 1 - 25 kOhm
16 2 - 125 kOhm
17 3 - 2.5 kOhm
19 - nuvoton,micbias-voltage: Micbias voltage level.
20 0 - VDDA
21 1 - VDDA
22 2 - VDDA * 1.1
23 3 - VDDA * 1.2
24 4 - VDDA * 1.3
25 5 - VDDA * 1.4
26 6 - VDDA * 1.53
27 7 - VDDA * 1.53
29 - nuvoton,sar-threshold-num: Number of buttons supported
30 …- nuvoton,sar-threshold: Impedance threshold for each button. Array that contains up to 8 buttons …
32 …e MICBIAS is configured by 'nuvoton,micbias-voltage', SAR_VOLTAGE is configured by 'nuvoton,sar-vo…
35 - nuvoton,sar-hysteresis: Button impedance measurement hysteresis.
37 - nuvoton,sar-voltage: Reference voltage for button impedance measurement.
38 0 - VDDA
39 1 - VDDA
40 2 - VDDA * 1.1
41 3 - VDDA * 1.2
42 4 - VDDA * 1.3
43 5 - VDDA * 1.4
44 6 - VDDA * 1.53
45 7 - VDDA * 1.53
47 - nuvoton,sar-compare-time: SAR compare time
48 0 - 500 ns
49 1 - 1 us
50 2 - 2 us
51 3 - 4 us
53 - nuvoton,sar-sampling-time: SAR sampling time
54 0 - 2 us
55 1 - 4 us
56 2 - 8 us
57 3 - 16 us
59 - nuvoton,short-key-debounce: Button short key press debounce time.
60 0 - 30 ms
61 1 - 50 ms
62 2 - 100 ms
64 - nuvoton,jack-eject-debounce: Jack ejection debounce time.
65 0 - 0 ms
66 1 - 1 ms
67 2 - 10 ms
75 interrupt-parent = <&gpio>;
77 nuvoton,vref-impedance = <2>;
78 nuvoton,micbias-voltage = <6>;
80 nuvoton,sar-threshold-num = <4>;
81 nuvoton,sar-threshold = <0xc 0x1e 0x38 0x60>;
82 nuvoton,sar-hysteresis = <0>;
83 nuvoton,sar-voltage = <6>;
84 nuvoton,sar-compare-time = <1>;
85 nuvoton,sar-sampling-time = <1>;
86 nuvoton,short-key-debounce = <0>;
87 nuvoton,jack-eject-debounce = <1>;