Lines Matching +full:vf610 +full:- +full:sai +full:- +full:clock

1 Freescale Synchronous Audio Interface (SAI).
3 The SAI is based on I2S module that used communicating with audio codecs,
10   - compatible		: Compatible list, contains "fsl,vf610-sai",
11 			  "fsl,imx6sx-sai", "fsl,imx6ul-sai",
12 			  "fsl,imx7ulp-sai", "fsl,imx8mq-sai",
13 			  "fsl,imx8qm-sai", "fsl,imx8mm-sai",
14 			  "fsl,imx8mn-sai", "fsl,imx8mp-sai", or
15 			  "fsl,imx8ulp-sai".
17   - reg			: Offset and length of the register set for the device.
19   - clocks		: Must contain an entry for each entry in clock-names.
21   - clock-names		: Must include the "bus" for register access and
22 			  "mclk1", "mclk2", "mclk3" for bit clock and frame
23 			  clock providing.
24                           "pll8k", "pll11k" are optional, they are the clock
25                           source for root clock, one is for 8kHz series rates
27   - dmas		: Generic dma devicetree binding as described in
30   - dma-names		: Two dmas have to be defined, "tx" and "rx".
32   - pinctrl-names	: Must contain a "default" entry.
34   - pinctrl-NNN		: One property must exist for each entry in
35 			  pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
38   - lsb-first		: Configures whether the LSB or the MSB is transmitted
43   - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
44 			  that SAI will work in the synchronous mode (sync Tx
49   - fsl,sai-asynchronous: This is a boolean property. If present, indicating
50 			  that SAI will work in the asynchronous mode, which
55   - fsl,dataline        : configure the dataline. it has 3 value for each configuration
65   - big-endian		: Boolean property, required if all the SAI
66 			  registers are big-endian rather than little-endian.
70   - fsl,sai-mclk-direction-output: This is a boolean property. If present,
71 			 indicates that SAI will output the SAI MCLK clock.
74 - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
78 - fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
81 sai2: sai@40031000 {
82 	      compatible = "fsl,vf610-sai";
84 	      pinctrl-names = "default";
85 	      pinctrl-0 = <&pinctrl_sai2_1>;
89 	      clock-names = "bus", "mclk1", "mclk2", "mclk3";
90 	      dma-names = "tx", "rx";
93 	      big-endian;
94 	      lsb-first;