Lines Matching full:dlg

8 - compatible : Should be "dlg,da7219"
32 - dlg,micbias-lvl : Voltage (mV) for Mic Bias
34 - dlg,mic-amp-in-sel : Mic input source type
38 - dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
46 - dlg,micbias-pulse-lvl : Mic bias higher voltage pulse level (mV).
48 - dlg,micbias-pulse-time : Mic bias higher voltage pulse duration (ms)
49 - dlg,btn-cfg : Periodic button press measurements for 4-pole jack (ms)
51 - dlg,mic-det-thr : Impedance threshold for mic detection measurement (Ohms)
53 - dlg,jack-ins-deb : Debounce time for jack insertion (ms)
55 - dlg,jack-det-rate: Jack type detection latency (3/4 pole)
57 - dlg,jack-rem-deb : Debounce time for jack removal (ms)
59 - dlg,a-d-btn-thr : Impedance threshold between buttons A and D
61 - dlg,d-b-btn-thr : Impedance threshold between buttons D and B
63 - dlg,b-c-btn-thr : Impedance threshold between buttons B and C
65 - dlg,c-mic-btn-thr : Impedance threshold between button C and Mic
67 - dlg,btn-avg : Number of 8-bit readings for averaged button measurement
69 - dlg,adc-1bit-rpt : Repeat count for 1-bit button measurement
77 		compatible = "dlg,da7219";
93 		dlg,ldo-lvl = <1200>;
94 		dlg,micbias-lvl = <2600>;
95 		dlg,mic-amp-in-sel = "diff";
98 			dlg,btn-cfg = <50>;
99 			dlg,mic-det-thr = <500>;
100 			dlg,jack-ins-deb = <20>;
101 			dlg,jack-det-rate = "32ms_64ms";
102 			dlg,jack-rem-deb = <1>;
104 			dlg,a-d-btn-thr = <0xa>;
105 			dlg,d-b-btn-thr = <0x16>;
106 			dlg,b-c-btn-thr = <0x21>;
107 			dlg,c-mic-btn-thr = <0x3E>;
109 			dlg,btn-avg = <4>;
110 			dlg,adc-1bit-rpt = <1>;