Lines Matching +full:amp +full:- +full:supply
5 - compatible : "cirrus,cs42l56"
7 - reg : the I2C address of the device for I2C
9 - VA-supply, VCP-supply, VLDO-supply : power supplies for the device,
14 - cirrus,gpio-nreset : GPIO controller's phandle and the number
17 - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
24 - cirrus,ain1a-ref-cfg, ain1b-ref-cfg : boolean, If present, AIN1A or AIN1B are configured
25 as a pseudo-differential input referenced to AIN1REF/AIN3A.
27 - cirrus,ain2a-ref-cfg, ain2b-ref-cfg : boolean, If present, AIN2A or AIN2B are configured
28 as a pseudo-differential input referenced to AIN2REF/AIN3B.
30 - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin.
38 - cirrus,adaptive-pwr-cfg : Configures how the power to the Headphone and Lineout
41 1 = Fixed - Headphone and Line Amp supply = + or - VCP/2.
42 2 = Fixed - Headphone and Line Amp supply = + or - VCP.
45 …- cirrus,hpf-left-freq, hpf-right-freq : Sets the corner frequency (-3dB point) for the internal H…
58 cirrus,gpio-nreset = <&gpio 10 0>;
59 cirrus,chgfreq-divisor = <0x05>;
61 cirrus,micbias-lvl = <5>;
62 VA-supply = <®_audio>;