Lines Matching +full:mic +full:- +full:det +full:- +full:gpios

5   - compatible : "cirrus,cs42l42"
7   - reg : the I2C address of the device for I2C.
9   - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply :
15   - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
18   - interrupts : IRQ line info CS42L42.
19   (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
22   - cirrus,ts-inv : Boolean property. Sets the behaviour of the jack plug
31   - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no
34   0 - 0ms,
35   1 - 125ms,
36   2 - 250ms,
37   3 - 500ms,
38   4 - 750ms,
39   5 - (Default) 1s,
40   6 - 1.25s,
41   7 - 1.5s,
43   - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG.
46   0 - 0ms,
47   1 - 125ms,
48   2 - 250ms,
49   3 - 500ms,
50   4 - 750ms,
51   5 - (Default) 1s,
52   6 - 1.25s,
53   7 - 1.5s,
55   - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after
56   enabling button detection interrupts. After auto-detection and before
60   0ms - 200ms,
63   - cirrus,btn-det-event-dbnce : This sets how long the driver delays after
68   0ms - 20ms,
71   - cirrus,bias-lvls : For a level-detect headset button scheme, each button
72   will bias the mic pin to a certain voltage. To determine which button was
81   Each 0-63
85   - cirrus,hs-bias-sense-disable: This is boolean property. If present the
87   the external 2.21-k resistor. HSBIAS_SENSE is hardware feature to reduce
98 	VA-supply = <&dummy_vreg>;
99 	VP-supply = <&dummy_vreg>;
100 	VCP-supply = <&dummy_vreg>;
101 	VD_FILT-supply = <&dummy_vreg>;
102 	VL-supply = <&dummy_vreg>;
104 	reset-gpios = <&axi_gpio_0 1 0>;
105 	interrupt-parent = <&gpio0>;
108 	cirrus,ts-inv = <0x00>;
109 	cirrus,ts-dbnc-rise = <0x05>;
110 	cirrus,ts-dbnc-fall = <0x00>;
111 	cirrus,btn-det-init-dbnce = <100>;
112 	cirrus,btn-det-event-dbnce = <10>;
113 	cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
114 	cirrus,hs-bias-ramp-rate = <0x02>;