Lines Matching +full:dvdd +full:- +full:3 +full:v +full:- +full:supply
4 https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1977.pdf
5 https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1978.pdf
6 https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1979.pdf
11 - compatible: Should contain one of the following:
16 - AVDD-supply: analog power supply for the device, please consult
20 - reset-gpios: the reset pin for the chip, for more details consult
23 - DVDD-supply: supply voltage for the digital core, please consult
26 - adi,micbias: configures the voltage setting for the MICBIAS pin.
27 Select 0/1/2/3/4/5/6/7/8 to specify MICBIAS voltage
28 5V/5.5V/6V/6.5V/7V/7.5V/8V/8.5V/9V
33 Documentation/devicetree/bindings/spi/spi-bus.txt
37 - reg: The i2c address. Value depends on the state of ADDR0
44 spi-max-frequency = <600000>;
46 AVDD-supply = <®ulator>;
47 DVDD-supply = <®ulator_digital>;
49 adi,micbias = <3>;
50 reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
57 AVDD-supply = <®ulator>;
58 DVDD-supply = <®ulator_digital>;
60 reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;