Lines Matching +full:pll +full:- +full:reset
5 - compatible: Should contain "adi,adau1701"
6 - reg: The i2c address. Value depends on the state of ADDR0
11 - reset-gpio: A GPIO spec to define which pin is connected to the
12 chip's !RESET pin. If specified, the driver will
13 assert a hardware reset at probe time.
14 - adi,pll-mode-gpios: An array of two GPIO specs to describe the GPIOs
15 the ADAU's PLL config pins are connected to.
19 - adi,pin-config: An array of 12 numerical values selecting one of the
23 - avdd-supply: Power supply for AVDD, providing 3.3V
24 - dvdd-supply: Power supply for DVDD, providing 3.3V
32 reset-gpio = <&gpio 23 0>;
33 avdd-supply = <&vdd_3v3_reg>;
34 dvdd-supply = <&vdd_3v3_reg>;
35 adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
36 adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4