Lines Matching +full:3 +full:- +full:ring
1 * Texas Instruments K3 NavigatorSS Ring Accelerator
3 The Ring Accelerator (RA) is a machine which converts read/write accesses
6 controller which needs to access ring elements from having to know the current
7 state of the ring (base address, current offset). The DMA controller
10 with a new address which corresponds to the head or tail element of the ring
13 The Ring Accelerator is a hardware module that is responsible for accelerating
17 - compatible : Must be "ti,am654-navss-ringacc";
18 - reg : Should contain register location and length of the following
20 - reg-names : should be
21 "rt" - The RA Ring Real-time Control/Status Registers
22 "fifos" - The RA Queues Registers
23 "proxy_gcfg" - The RA Proxy Global Config Registers
24 "proxy_target" - The RA Proxy Datapath Registers
25 - ti,num-rings : Number of rings supported by RA
26 - ti,sci-rm-range-gp-rings : TI-SCI RM subtype for GP ring range
27 - ti,sci : phandle on TI-SCI compatible System controller node
28 - ti,sci-dev-id : TI-SCI device id of the ring accelerator
29 - msi-parent : phandle for "ti,sci-inta" interrupt controller
32 -- ti,dma-ring-reset-quirk : enable ringacc / udma ring state interoperability
37 ringacc: ringacc@3c000000 {
38 compatible = "ti,am654-navss-ringacc";
43 reg-names = "rt", "fifos",
45 ti,num-rings = <818>;
46 ti,sci-rm-range-gp-rings = <0x2>; /* GP ring range */
47 ti,dma-ring-reset-quirk;
49 ti,sci-dev-id = <187>;
50 msi-parent = <&inta_main_udmass>;