Lines Matching +full:msm +full:- +full:uart
4 representing a serial sub-node device that is mux'd as part of the GSBI
9 - compatible: Should contain "qcom,gsbi-v1.0.0"
10 - cell-index: Should contain the GSBI index
11 - reg: Address range for GSBI registers
12 - clocks: required clock
13 - clock-names: must contain "iface" entry
14 - qcom,mode : indicates MUX value for configuration of the serial interface.
15 Please reference dt-bindings/soc/qcom,gsbi.h for valid mux values.
18 - qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference
19 dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
20 - syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses
24 - #address-cells: Must be 1
25 - #size-cells: Must be 1
26 - ranges: Must be present
31 devices. These serial devices can be a QCOM UART, I2C controller, spi
35 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
36 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
37 Documentation/devicetree/bindings/serial/qcom,msm-uartdm.txt
41 #include <dt-bindings/soc/qcom,gsbi.h>
44 compatible = "qcom,gsbi-v1.0.0";
45 cell-index = <4>;
48 clock-names = "iface";
49 #address-cells = <1>;
50 #size-cells = <1>;
55 syscon-tcsr = <&tcsr>;
60 compatible = "qcom,i2c-qup-v1.1.1";
65 clock-names = "core", "iface";
67 clock-frequency = <200000>;
69 #address-cells = <1>;
70 #size-cells = <0>;
75 compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
80 clock-names = "core", "iface";
85 compatible = "qcom,apq8064-tcsr", "syscon";