Lines Matching +full:active +full:- +full:delay

1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   direction for the built-in half-duplex mode. The properties described
11   hereafter shall be given to a half-duplex capable UART node.
14   - Rob Herring <robh@kernel.org>
17   rs485-rts-delay:
18     description: prop-encoded-array <a b>
19     $ref: /schemas/types.yaml#/definitions/uint32-array
22         - description: Delay between rts signal and beginning of data sent in
23             milliseconds. It corresponds to the delay before sending data.
26         - description: Delay between end of data sent and rts signal in milliseconds.
27             It corresponds to the delay after sending data and actual release
32   rs485-rts-active-high:
36   rs485-rts-active-low:
40   rs485-rx-active-high:
42       True indicates active high (default is low).
45   linux,rs485-enabled-at-boot-time:
50   rs485-rx-during-tx:
54   rs485-term-gpios:
58   rs485-rx-during-tx-gpios:
59     description: Output GPIO pin that sets the state of rs485-rx-during-tx. This
61       the active state enables RX during TX.