Lines Matching +full:mt8195 +full:- +full:pinctrl
4 - compatible should contain:
5 * "mediatek,mt2701-uart" for MT2701 compatible UARTS
6 * "mediatek,mt2712-uart" for MT2712 compatible UARTS
7 * "mediatek,mt6580-uart" for MT6580 compatible UARTS
8 * "mediatek,mt6582-uart" for MT6582 compatible UARTS
9 * "mediatek,mt6589-uart" for MT6589 compatible UARTS
10 * "mediatek,mt6755-uart" for MT6755 compatible UARTS
11 * "mediatek,mt6765-uart" for MT6765 compatible UARTS
12 * "mediatek,mt6779-uart" for MT6779 compatible UARTS
13 * "mediatek,mt6795-uart" for MT6795 compatible UARTS
14 * "mediatek,mt6797-uart" for MT6797 compatible UARTS
15 * "mediatek,mt7622-uart" for MT7622 compatible UARTS
16 * "mediatek,mt7623-uart" for MT7623 compatible UARTS
17 * "mediatek,mt7629-uart" for MT7629 compatible UARTS
18 * "mediatek,mt7986-uart", "mediatek,mt6577-uart" for MT7986 compatible UARTS
19 * "mediatek,mt8127-uart" for MT8127 compatible UARTS
20 * "mediatek,mt8135-uart" for MT8135 compatible UARTS
21 * "mediatek,mt8173-uart" for MT8173 compatible UARTS
22 * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
23 * "mediatek,mt8186-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
24 * "mediatek,mt8192-uart", "mediatek,mt6577-uart" for MT8192 compatible UARTS
25 * "mediatek,mt8195-uart", "mediatek,mt6577-uart" for MT8195 compatible UARTS
26 * "mediatek,mt8516-uart" for MT8516 compatible UARTS
27 * "mediatek,mt6577-uart" for MT6577 and all of the above
29 - reg: The base address of the UART register bank.
31 - interrupts:
34 support Rx in-band wake up. If one would like to use this feature,
35 one must create an addtional pinctrl to reconfigure Rx pin to normal
38 - clocks : Must contain an entry for each entry in clock-names.
39 See ../clocks/clock-bindings.txt for details.
40 - clock-names:
41 - "baud": The clock the baudrate is derived from
42 - "bus": The bus clock for register accesses (optional)
50 compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
55 clock-names = "baud", "bus";
56 pinctrl-names = "default", "sleep";
57 pinctrl-0 = <&uart_pin>;
58 pinctrl-1 = <&uart_pin_sleep>;