Lines Matching full:fps

39 are required to configure FPS configuration parameters for SDs and LDOs.
41 Power Sequence (FPS).
44 - maxim,active-fps-source:		FPS source for the regulators to get
48 						FPS source is FPS0.
50 						FPS source is FPS1
52 						FPS source is FPS2
55 						by FPS events and it gets
59 					the FPS configuration register for that
62 - maxim,active-fps-power-up-slot:	Sequencing event slot number on which
64 					master FPS input event set to HIGH.
66 					This is applicable if FPS source is
69 - maxim,active-fps-power-down-slot:	Sequencing event slot number on which
71 					FPS input event set to LOW.
73 					This is applicable if FPS source is
76 - maxim,suspend-fps-source:		This is same as property
77 					"maxim,active-fps-source" but value
81 - maxim,suspend-fps-power-up-slot:	This is same as property
82 					"maxim,active-fps-power-up-slot" but
83 					this value get configured into FPS
87 					FPS source is selected as FPS0, FPS1 or
89 - maxim,suspend-fps-power-down-slot:	This is same as property
90 					"maxim,active-fps-power-down-slot" but
91 					this value get configured into FPS
95 					FPS source is selected as FPS0, FPS1 or
134 			maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
143 			maxim,active-fps-source = <MAX77620_FPS_SRC_0>;