Lines Matching +full:en +full:- +full:us
4 - compatible: must be equal to "maxim,max8952"
5 - reg: I2C slave address, usually 0x60
6 - max8952,dvs-mode-microvolt: array of 4 integer values defining DVS voltages
8 - any required generic properties defined in regulator.txt
11 - max8952,vid-gpios: array of two GPIO pins used for DVS voltage selection
12 - max8952,en-gpio: GPIO used to control enable status of regulator
13 - max8952,default-mode: index of default DVS voltage, from <0, 3> range
14 - max8952,sync-freq: sync frequency, must be one of following values:
15 - 0: 26 MHz
16 - 1: 13 MHz
17 - 2: 19.2 MHz
19 - max8952,ramp-speed: voltage ramp speed, must be one of following values:
20 - 0: 32mV/us
21 - 1: 16mV/us
22 - 2: 8mV/us
23 - 3: 4mV/us
24 - 4: 2mV/us
25 - 5: 1mV/us
26 - 6: 0.5mV/us
27 - 7: 0.25mV/us
28 Defaults to 32mV/us if not specified.
29 - any available generic properties defined in regulator.txt
37 /* max8952-specific properties */
38 max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
39 max8952,en-gpio = <&gpx0 1 0>;
40 max8952,default-mode = <0>;
41 max8952,dvs-mode-microvolt = <1250000>, <1200000>,
43 max8952,sync-freq = <0>;
44 max8952,ramp-speed = <0>;
47 regulator-name = "vdd_arm";
48 regulator-min-microvolt = <770000>;
49 regulator-max-microvolt = <1400000>;
50 regulator-always-on;
51 regulator-boot-on;