Lines Matching +full:pwm +full:- +full:0

4 - compatible: Must be:
5   - "nvidia,tegra20-pwm": for Tegra20
6   - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30
7   - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114
8   - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124
9   - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132
10   - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210
11   - "nvidia,tegra186-pwm": for Tegra186
12   - "nvidia,tegra194-pwm": for Tegra194
13 - reg: physical base address and length of the controller's registers
14 - #pwm-cells: should be 2. See pwm.yaml in this directory for a description of
16 - clocks: Must contain one entry, for the module clock.
17   See ../clocks/clock-bindings.txt for details.
18 - resets: Must contain an entry for each entry in reset-names.
20 - reset-names: Must include the following entries:
21   - pwm
25 In some of the interface like PWM based regulator device, it is required
29 	Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
31 The PWM node will have following optional properties.
32 pinctrl-names:	Pin state names. Must be "default" and "sleep".
33 pinctrl-0:	phandle for the default/active state of pin configurations.
34 pinctrl-1:	phandle for the sleep state of pin configurations.
38 	pwm: pwm@7000a000 {
39 		compatible = "nvidia,tegra20-pwm";
40 		reg = <0x7000a000 0x100>;
41 		#pwm-cells = <2>;
44 		reset-names = "pwm";
51 it requires PWM output to be tristated when system enters suspend.
54 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
72 	pwm@7000a000 {
73 		/* Mandatory PWM properties */
74 		pinctrl-names = "default", "sleep";
75 		pinctrl-0 = <&pwm_active_state>;
76 		pinctrl-1 = <&pwm_sleep_state>;