Lines Matching +full:reg +full:- +full:property

3 RAID Engine nodes are defined to describe on-chip RAID accelerators.  Each RAID
11 - compatible:	Should contain "fsl,raideng-v1.0" as the value
15 - reg:		offset and length of the register set for the device
16 - ranges:	standard ranges property specifying the translation
22 		compatible = "fsl,raideng-v1.0";
23 		#address-cells = <1>;
24 		#size-cells = <1>;
25 		reg	= <0x320000 0x10000>;
30 There must be a sub-node for each job queue present in RAID Engine
31 This node must be a sub-node of the main RAID Engine node
33 - compatible:	Should contain "fsl,raideng-v1.0-job-queue" as the value
35 - reg:		offset and length of the register set for job queue
36 - ranges:	standard ranges property specifying the translation
42 		compatible = "fsl,raideng-v1.0-job-queue";
43 		reg	   = <0x1000 0x1000>;
48 There must be a sub-node for each job ring present in RAID Engine
49 This node must be a sub-node of job queue node
51 - compatible:	Must contain "fsl,raideng-v1.0-job-ring" as the value
53 		"fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
55 - reg:		offset and length of the register set for job ring
56 - interrupts:	interrupt mapping for job ring IRQ
58 Optional property:
60 - fsl,liodn:	Specifies the LIODN to be used for Job Ring. This
61 		property is normally set by firmware. Value
62 		is of 12-bits which is the LIODN number for this JR.
63 		This property is used by the IOMMU (PAMU) to distinguish
70 		compatible = "fsl,raideng-v1.0-job-queue";
71 		reg	   = <0x1000 0x1000>;
75 			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
76 			reg	   = <0x0 0x400>;
78 			interrupt-parent = <&mpic>;