Lines Matching +full:high +full:- +full:resolution

5  - compatible : "ti,bq24735"
8  - interrupts : Specify the interrupt to be used to trigger when the AC
10  - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
14    (high) on AC adapter presence.
15  - ti,charge-current : Used to control and set the charging current. This value
16    must be between 128mA and 8.128A with a 64mA step resolution. The POR value
19  - ti,charge-voltage : Used to control and set the charging voltage. This value
20    must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
23  - ti,input-current : Used to control and set the charger input current. This
24    value must be between 128mA and 8.064A with a 128mA step resolution. The
27  - ti,external-control : Indicates that the charger is configured externally
30  - poll-interval : In case 'interrupts' is not specified, poll AC adapter
38 		ti,ac-detect-gpios = <&gpio 72 0x1>;