Lines Matching +full:charging +full:- +full:current

1 # SPDX-License-Identifier: GPL-2.0
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: Bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
11   - Sebastian Reichel <sre@kernel.org>
14   - $ref: power-supply.yaml#
19       - enum:
20           - ti,bq25890
21       - items:
22           - enum:
23               - ti,bq25892
24               - ti,bq25895
25               - ti,bq25896
26           - const: ti,bq25890
34   ti,battery-regulation-voltage:
36     description: maximum charging voltage (in uV)
38   ti,charge-current:
40     description: maximum charging current (in uA)
42   ti,termination-current:
45       charge will be terminated when current in constant-voltage phase
48   ti,precharge-current:
50     description: maximum charge current during precharge phase (in uA)
52   ti,minimum-sys-voltage:
55       when battery is charging and it is below minimum system voltage,
56       the system will be regulated above minimum-sys-voltage setting (in uV)
58   ti,boost-voltage:
62   ti,boost-max-current:
64     description: maximum allowed current draw in boost mode (in uA)
66   ti,boost-low-freq:
70   ti,use-ilim-pin:
72       ILIM resistor will be used and the input current will be the lower
76   ti,thermal-regulation-threshold:
79       temperature above which the charge current is lowered, to avoid overheating
82   ti,ibatcomp-micro-ohms:
85   ti,ibatcomp-clamp-microvolt:
86     description: max. charging voltage adjustment due to expected voltage drop on in-series resistor
89   - compatible
90   - reg
91   - interrupts
92   - ti,battery-regulation-voltage
93   - ti,charge-current
94   - ti,termination-current
95   - ti,precharge-current
96   - ti,minimum-sys-voltage
97   - ti,boost-voltage
98   - ti,boost-max-current
103   - |
104     #include <dt-bindings/interrupt-controller/irq.h>
106       #address-cells = <1>;
107       #size-cells = <0>;
113         interrupt-parent = <&gpio1>;
116         ti,battery-regulation-voltage = <4200000>;
117         ti,charge-current = <1000000>;
118         ti,termination-current = <50000>;
119         ti,precharge-current = <128000>;
120         ti,minimum-sys-voltage = <3600000>;
121         ti,boost-voltage = <5000000>;
122         ti,boost-max-current = <1000000>;
124         ti,use-ilim-pin;
125         ti,thermal-regulation-threshold = <120>;