Lines Matching +full:opp +full:- +full:specific

1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/power/power-domain.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Rafael J. Wysocki <rjw@rjwysocki.net>
11 - Kevin Hilman <khilman@kernel.org>
12 - Ulf Hansson <ulf.hansson@linaro.org>
25 \#power-domain-cells property in the PM domain provider node.
29 pattern: "^(power-controller|power-domain|performance-domain)([@-].*)?$"
31 domain-idle-states:
32 $ref: /schemas/types.yaml#/definitions/phandle-array
37 power-domain provider. The idle state definitions are compatible with the
38 domain-idle-state bindings, specified in ./domain-idle-state.yaml.
40 Note that, the domain-idle-state property reflects the idle states of this
41 PM domain and not the idle states of the devices or sub-domains in the PM
42 domain. Devices and sub-domains have their own idle states independent of
44 domain would be considered as capable of being powered-on or powered-off.
46 operating-points-v2:
48 Phandles to the OPP tables of power domains that are capable of scaling
51 provider have identical OPP tables, then this shall contain a single
52 phandle. Refer to ../opp/opp-v2-base.yaml for more information.
54 "#power-domain-cells":
61 power-domains:
65 from another power domain (or have other hardware specific
72 - "#power-domain-cells"
77 - |
78 power: power-controller@12340000 {
79 compatible = "foo,power-controller";
81 #power-domain-cells = <1>;
87 - |
88 parent2: power-controller@12340000 {
89 compatible = "foo,power-controller";
91 #power-domain-cells = <1>;
94 child2: power-controller@12341000 {
95 compatible = "foo,power-controller";
97 power-domains = <&parent2 0>;
98 #power-domain-cells = <1>;
105 - |
106 parent3: power-controller@12340000 {
107 compatible = "foo,power-controller";
109 #power-domain-cells = <0>;
110 domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>;
113 child3: power-controller@12341000 {
114 compatible = "foo,power-controller";
116 power-domains = <&parent3>;
117 #power-domain-cells = <0>;
118 domain-idle-states = <&DOMAIN_PWR_DN>;
121 domain-idle-states {
122 DOMAIN_RET: domain-retention {
123 compatible = "domain-idle-state";
124 entry-latency-us = <1000>;
125 exit-latency-us = <2000>;
126 min-residency-us = <10000>;
129 DOMAIN_PWR_DN: domain-pwr-dn {
130 compatible = "domain-idle-state";
131 entry-latency-us = <5000>;
132 exit-latency-us = <8000>;
133 min-residency-us = <7000>;