Lines Matching +full:no +full:- +full:wp

3 Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding
7 - compatible: "marvell,dove-pinctrl"
8 - clocks: (optional) phandle of pdma clock
9 - reg: register specifiers of MPP, MPP4, and PMU MPP registers
19 mpp1          1        gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm), pmu*
23                        uart1(cts), lcd-spi(cs1), pmu*
25 mpp5          5        gpio, pmu, uart3(cts), sdio1(wp), spi1(cs), pmu*
31 mpp11         11       gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl),
35 mpp13         13       gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp),
39 mpp16         16       gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1)
40 mpp17         17       gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda),
41                        ac97-1(sysclko)
44 mpp20         20       gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso),
46 mpp21         21       gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0),
49                        lcd-spi(mosi), uart1(cts), ssp(txd)
51                        lcd-spi(sck), ssp(sclk)
52 mpp_camera    24-39    gpio, camera
53 mpp_sdio0     40-45    gpio, sdio0
54 mpp_sdio1     46-51    gpio, sdio1
55 mpp_audio1    52-57    gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp,
57 mpp_spi0      58-61    gpio, spi0
58 mpp_uart1     62-63    gpio, uart1
59 mpp_nand      64-71    gpo, nand
60 audio0        -        i2s, ac97
61 twsi          -        none, opt1, opt2, opt3
64 pmu-nc               Pin not driven by any PM function
65 pmu-low              Pin driven low (0)
66 pmu-high             Pin driven high (1)
68 cpu-pwr-down         Pin is used for CPU_PWRDWN
69 standby-pwr-down     Pin is used for STBY_PWRDWN
70 core-pwr-good        Pin is used for CORE_PWR_GOOD (Pins 0-7 only)
71 cpu-pwr-good         Pin is used for CPU_PWR_GOOD (Pins 8-15 only)
72 bat-fault            Pin is used for BATTERY_FAULT
73 ext0-wakeup          Pin is used for EXT0_WU
74 ext1-wakeup          Pin is used for EXT0_WU
75 ext2-wakeup          Pin is used for EXT0_WU
76 pmu-blink            Pin is used for blink function
80   - gpio          : gpio on pins 52-57
81   - i2s1/spdifo   : audio1 i2s on pins 52-55 and spdifo on 57, no gpios
82   - i2s1          : audio1 i2s on pins 52-55, gpio on pins 56,57
83   - spdifo        : spdifo on pin 57, gpio on pins 52-55
84   - twsi          : twsi on pins 56,57, gpio on pins 52-55
85   - ssp/spdifo    : ssp on pins 52-55, spdifo on pin 57, no gpios
86   - ssp           : ssp on pins 52-55, gpio on pins 56,57
87   - ssp/twsi      : ssp on pins 52-55, twsi on pins 56,57, no gpios