Lines Matching +full:hdmi +full:- +full:phy

1 ROCKCHIP HDMI PHY WITH INNO IP BLOCK
4  - compatible : should be one of the listed compatibles:
5 	* "rockchip,rk3228-hdmi-phy",
6 	* "rockchip,rk3328-hdmi-phy";
7  - reg : Address and length of the hdmi phy control register set
8  - clocks : phandle + clock specifier for the phy clocks
9  - clock-names : string, clock name, must contain "sysclk" for system
10 	  control and register configuration, "refoclk" for crystal-
11 	  oscillator reference PLL clock input and "refpclk" for pclk-
13  - #clock-cells: should be 0.
14  - clock-output-names : shall be the name for the output clock.
15  - interrupts : phandle + interrupt specified for the hdmiphy interrupt
16  - #phy-cells : must be 0. See ./phy-bindings.txt for details.
18 Optional properties for rk3328-hdmi-phy:
19  - nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
20  - nvmem-cell-names : "cpu-version" to read the chip version, required
24 	hdmi_phy: hdmi-phy@12030000 {
25 		compatible = "rockchip,rk3228-hdmi-phy";
27 		#phy-cells = <0>;
29 		clock-names = "sysclk", "refoclk", "refpclk";
30 		#clock-cells = <0>;
31 		clock-output-names = "hdmi_phy";
35 Then the PHY can be used in other nodes such as:
37 	hdmi: hdmi@200a0000 {
38 		compatible = "rockchip,rk3228-dw-hdmi";
41 		phy-names = "hdmi";