Lines Matching +full:pll +full:- +full:reset +full:- +full:mode
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/phy/nvidia,tegra186-xusb-padctl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Thierry Reding <thierry.reding@gmail.com>
11 - Jon Hunter <jonathanh@nvidia.com>
21 Some of the lanes are high-speed lanes, which can be used for PCIe, SATA or
22 super-speed USB. Other lanes are for various types of low-speed, full-speed
23 or high-speed USB (such as UTMI, ULPI and HSIC). The XUSB pad controller
24 contains a software-configurable mux that sits between the I/O controller
27 In addition to per-lane configuration, USB 3.0 ports may require additional
28 settings on a per-board basis.
30 Pads will be represented as children of the top-level XUSB pad controller
33 PHY bindings, as described by the phy-bindings.txt file in this directory.
45 const: nvidia,tegra186-xusb-padctl
49 - description: pad controller registers
50 - description: AO registers
54 - description: XUSB pad controller interrupt
56 reg-names:
58 - const: padctl
59 - const: ao
63 - description: pad controller reset
65 reset-names:
67 - const: padctl
69 avdd-pll-erefeut-supply:
73 avdd-usb-supply:
74 description: USB I/Os, VBUS, ID, REXT, D+/D- power supply. Must
77 vclamp-usb-supply:
80 vddio-hsic-supply:
102 - description: USB2 tracking clock
104 clock-names:
106 - const: trk
112 usb2-0:
116 "#phy-cells":
124 usb2-1:
128 "#phy-cells":
136 usb2-2:
140 "#phy-cells":
154 - description: HSIC tracking clock
156 clock-names:
158 - const: trk
164 hsic-0:
168 "#phy-cells":
184 usb3-0:
188 "#phy-cells":
196 usb3-1:
200 "#phy-cells":
208 usb3-2:
212 "#phy-cells":
232 usb2-0:
237 # match on gpio-usb-b-connector or usb-b-connector and cause
242 mode:
243 description: A string that determines the mode in which to
254 usb-role-switch:
257 supports OTG or peripheral mode. If present, the port
261 See ../connector/usb-connector.yaml.
263 vbus-supply:
268 usb-role-switch: [ connector ]
270 usb2-1:
275 # match on gpio-usb-b-connector or usb-b-connector and cause
280 mode:
281 description: A string that determines the mode in which to
292 usb-role-switch:
295 supports OTG or peripheral mode. If present, the port
299 See ../connector/usb-connector.yaml.
301 vbus-supply:
306 usb-role-switch: [ connector ]
308 usb2-2:
313 # match on gpio-usb-b-connector or usb-b-connector and cause
318 mode:
319 description: A string that determines the mode in which to
330 usb-role-switch:
333 supports OTG or peripheral mode. If present, the port
337 See ../connector/usb-connector.yaml.
339 vbus-supply:
344 usb-role-switch: [ connector ]
346 hsic-0:
350 usb3-0:
360 nvidia,usb2-companion:
362 number to map this super-speed USB port to. The range of
367 vbus-supply:
371 usb3-1:
381 nvidia,usb2-companion:
383 number to map this super-speed USB port to. The range of
388 vbus-supply:
392 usb3-2:
402 nvidia,usb2-companion:
404 number to map this super-speed USB port to. The range of
409 vbus-supply:
416 - compatible
417 - reg
418 - resets
419 - reset-names
420 - avdd-pll-erefeut-supply
421 - avdd-usb-supply
422 - vclamp-usb-supply
423 - vddio-hsic-supply
426 - |
427 #include <dt-bindings/clock/tegra186-clock.h>
428 #include <dt-bindings/gpio/tegra186-gpio.h>
429 #include <dt-bindings/interrupt-controller/arm-gic.h>
430 #include <dt-bindings/reset/tegra186-reset.h>
433 compatible = "nvidia,tegra186-xusb-padctl";
436 reg-names = "padctl", "ao";
440 reset-names = "padctl";
442 avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
443 avdd-usb-supply = <&vdd_3v3_sys>;
444 vclamp-usb-supply = <&vdd_1v8>;
445 vddio-hsic-supply = <&gnd>;
450 clock-names = "trk";
453 usb2-0 {
455 #phy-cells = <0>;
458 usb2-1 {
460 #phy-cells = <0>;
463 usb2-2 {
465 #phy-cells = <0>;
472 clock-names = "trk";
476 hsic-0 {
478 #phy-cells = <0>;
485 usb3-0 {
487 #phy-cells = <0>;
490 usb3-1 {
492 #phy-cells = <0>;
495 usb3-2 {
497 #phy-cells = <0>;
504 usb2-0 {
505 mode = "otg";
506 vbus-supply = <&vdd_usb0>;
507 usb-role-switch;
510 compatible = "gpio-usb-b-connector",
511 "usb-b-connector";
512 label = "micro-USB";
514 vbus-gpios = <&gpio TEGRA186_MAIN_GPIO(X, 7) GPIO_ACTIVE_LOW>;
515 id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
519 usb2-1 {
520 vbus-supply = <&vdd_usb1>;
521 mode = "host";
524 usb2-2 {
528 hsic-0 {
532 usb3-0 {
533 nvidia,usb2-companion = <1>;
536 usb3-1 {
540 usb3-2 {