Lines Matching +full:otg +full:- +full:vbus

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,suniv-f1c100s-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Chen-Yu Tsai <wens@csie.org>
11   - Maxime Ripard <mripard@kernel.org>
14   "#phy-cells":
18     const: allwinner,suniv-f1c100s-usb-phy
24   reg-names:
29     description: USB OTG PHY bus clock
31   clock-names:
36     description: USB OTG reset
38   reset-names:
41   usb0_id_det-gpios:
43     description: GPIO to the USB OTG ID pin
45   usb0_vbus_det-gpios:
47     description: GPIO to the USB OTG VBUS detect pin
49   usb0_vbus_power-supply:
50     description: Power supply to detect the USB OTG VBUS
52   usb0_vbus-supply:
53     description: Regulator controlling USB OTG VBUS
56   - "#phy-cells"
57   - compatible
58   - clocks
59   - clock-names
60   - reg
61   - reg-names
62   - resets
63   - reset-names
68   - |
69     #include <dt-bindings/gpio/gpio.h>
70     #include <dt-bindings/clock/suniv-ccu-f1c100s.h>
71     #include <dt-bindings/reset/suniv-ccu-f1c100s.h>
74         compatible = "allwinner,suniv-f1c100s-usb-phy";
76         reg-names = "phy_ctrl";
78         clock-names = "usb0_phy";
80         reset-names = "usb0_reset";
81         #phy-cells = <1>;
82         usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>;