Lines Matching +full:otg +full:- +full:vbus

1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-a23-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10   - Chen-Yu Tsai <wens@csie.org>
11   - Maxime Ripard <mripard@kernel.org>
14   "#phy-cells":
19       - allwinner,sun8i-a23-usb-phy
20       - allwinner,sun8i-a33-usb-phy
24       - description: PHY Control registers
25       - description: PHY PMU1 registers
27   reg-names:
29       - const: phy_ctrl
30       - const: pmu1
34       - description: USB OTG PHY bus clock
35       - description: USB Host 0 PHY bus clock
37   clock-names:
39       - const: usb0_phy
40       - const: usb1_phy
44       - description: USB OTG reset
45       - description: USB Host 1 Controller reset
47   reset-names:
49       - const: usb0_reset
50       - const: usb1_reset
52   usb0_id_det-gpios:
54     description: GPIO to the USB OTG ID pin
56   usb0_vbus_det-gpios:
58     description: GPIO to the USB OTG VBUS detect pin
60   usb0_vbus_power-supply:
61     description: Power supply to detect the USB OTG VBUS
63   usb0_vbus-supply:
64     description: Regulator controlling USB OTG VBUS
66   usb1_vbus-supply:
70   - "#phy-cells"
71   - compatible
72   - clocks
73   - clock-names
74   - reg
75   - reg-names
76   - resets
77   - reset-names
82   - |
83     #include <dt-bindings/gpio/gpio.h>
84     #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
85     #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
88         #phy-cells = <1>;
89         compatible = "allwinner,sun8i-a23-usb-phy";
91         reg-names = "phy_ctrl", "pmu1";
94         clock-names = "usb0_phy",
98         reset-names = "usb0_reset",
100         usb0_id_det-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
101         usb0_vbus_power-supply = <&usb_power_supply>;
102         usb0_vbus-supply = <&reg_drivevbus>;
103         usb1_vbus-supply = <&reg_usb1_vbus>;