Lines Matching full:must

4 - compatible: Must be:
10 - power-domains: To ungate power partition by BPMP powergate driver. Must
13 - device_type: Must be "pci"
15 registers. Must contain an entry for each entry in the reg-names property.
16 - reg-names: Must include the following entries:
20 - interrupts: A list of interrupt outputs of the controller. Must contain an
22 - interrupt-names: Must include the following entries:
26 - #address-cells: Address representation for root ports (must be 3)
33 - #size-cells: Size representation for root ports (must be 2)
35 PCI regions. The entries must be 6 cells each, where the first three cells
50 - #interrupt-cells: Size representation for interrupts (must be 1)
54 - clocks: Must contain an entry for each entry in clock-names.
56 - clock-names: Must include the following entries:
61 - resets: Must contain an entry for each entry in reset-names.
63 - reset-names: Must include the following entries:
69 - pinctrl-names: A list of pinctrl state names. Must contain the following
77 - phys: Must contain an entry for each entry in phy-names.
78 - phy-names: Must include the following entries:
85 - avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
86 - vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
87 - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
89 - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
91 - vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V.
95 - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must
97 - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must
99 - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
102 Must supply 3.3 V.
105 - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
106 - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
108 - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
109 - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
113 - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V.
114 - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
116 Must supply 3.3 V.
117 - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
123 clocks. Must supply 1.8 V.
124 - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
125 - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must
130 - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V.
131 - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must
134 Must supply 1.8 V.
135 - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must
141 - device_type: Must be "pci"
144 - #address-cells: Must be 3
145 - #size-cells: Must be 2
154 - phys: Must contain an phandle to a PHY for each entry in phy-names.
155 - phy-names: Must include an entry for each active lane. Note that the number