Lines Matching +full:opp +full:- +full:1500000000
1 Generic OPP (Operating Performance Points) Bindings
2 ----------------------------------------------------
4 Devices work at voltage-current-frequency combinations and some implementations
10 This document contain multiple versions of OPP binding and only one of them
13 Binding 1: operating-points
16 This binding only supports voltage-frequency pairs.
19 - operating-points: An array of 2-tuples items, and each item consists
20 of frequency and voltage like <freq-kHz vol-uV>.
27 compatible = "arm,cortex-a9";
29 next-level-cache = <&L2>;
30 operating-points = <
39 Binding 2: operating-points-v2
42 * Property: operating-points-v2
44 Devices supporting OPPs must set their "operating-points-v2" property with
45 phandle to a OPP table in their DT node. The OPP core will use this phandle to
50 phandle is available, then the same OPP table will be used for all power domains
54 should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
55 and should have a compatible description like: "operating-points-v2-<vendor>".
57 * OPP Table Node
63 - compatible: Allow OPPs to express their compatibility. It should be:
64 "operating-points-v2".
66 - OPP nodes: One or more OPP nodes describing voltage-current-frequency
68 reference an OPP. These are mandatory except for the case where the OPP table
69 is present only to indicate dependency between devices using the opp-shared
73 - opp-shared: Indicates that device nodes using this OPP Table Node's phandle
76 but they share OPP tables.
78 - status: Marks the OPP table enabled/disabled.
81 * OPP Node
83 This defines voltage-current-frequency combinations along with other related
87 - opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
89 uniquely identify the OPP nodes exists. Devices like power domains must have
92 - opp-peak-kBps: Peak bandwidth in kilobytes per second, expressed as an array
93 of 32-bit big-endian integers. Each element of the array represents the
98 - opp-microvolt: voltage in micro Volts.
105 by angular brackets <>. The OPP binding doesn't provide any provisions to
113 - opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
114 the above opp-microvolt property, but allows multiple voltage ranges to be
115 provided for the same OPP. At runtime, the platform can pick a <name> and
116 matching opp-microvolt-<name> property will be enabled for all OPPs. If the
118 opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
121 - opp-microamp: The maximum current drawn by the device in microamperes
126 Should only be set if opp-microvolt is set for the OPP.
131 the regulators, then this field is not required. The OPP binding doesn't
136 - opp-microamp-<name>: Named opp-microamp property. Similar to
137 opp-microvolt-<name> property, but for microamp instead.
139 - opp-level: A value representing the performance level of the device,
140 expressed as a 32-bit integer.
142 - opp-avg-kBps: Average bandwidth in kilobytes per second, expressed as an array
143 of 32-bit big-endian integers. Each element of the array represents the
146 meaningful in OPP tables where opp-peak-kBps is present.
148 - clock-latency-ns: Specifies the maximum possible transition latency (in
149 nanoseconds) for switching to this OPP from any other OPP.
151 - turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is
156 - opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
157 in the table have this, the OPP with highest opp-hz will be used.
159 - opp-supported-hw: This property allows a platform to enable only a subset of
160 the OPPs from the larger set present in the OPP table, based on the current
164 sub-group of hardware versions supported by the OPP. i.e. <sub-group A>,
165 <sub-group B>, etc. The OPP will be enabled if _any_ of these sub-groups match
168 Each sub-group is a platform defined array representing the hierarchy of
172 opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
177 and a non-zero output for _all_ the levels in a sub-group means the OPP is
178 supported by hardware. A value of 0xFFFFFFFF for each level in the sub-group
179 will enable the OPP for all versions for the hardware.
181 - status: Marks the node enabled/disabled.
183 - required-opps: This contains phandle to an OPP node in another device's OPP
185 OPP of a different device. It should not contain multiple phandles to the OPP
186 nodes in the same OPP table. This specifies the minimum required OPP of the
187 device(s), whose OPP's phandle is present in this property, for the
188 functioning of the current device at the current OPP (where this property is
191 Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
195 #address-cells = <1>;
196 #size-cells = <0>;
199 compatible = "arm,cortex-a9";
201 next-level-cache = <&L2>;
203 clock-names = "cpu";
204 cpu-supply = <&cpu_supply0>;
205 operating-points-v2 = <&cpu0_opp_table>;
209 compatible = "arm,cortex-a9";
211 next-level-cache = <&L2>;
213 clock-names = "cpu";
214 cpu-supply = <&cpu_supply0>;
215 operating-points-v2 = <&cpu0_opp_table>;
220 compatible = "operating-points-v2";
221 opp-shared;
223 opp-1000000000 {
224 opp-hz = /bits/ 64 <1000000000>;
225 opp-microvolt = <975000 970000 985000>;
226 opp-microamp = <70000>;
227 clock-latency-ns = <300000>;
228 opp-suspend;
230 opp-1100000000 {
231 opp-hz = /bits/ 64 <1100000000>;
232 opp-microvolt = <1000000 980000 1010000>;
233 opp-microamp = <80000>;
234 clock-latency-ns = <310000>;
236 opp-1200000000 {
237 opp-hz = /bits/ 64 <1200000000>;
238 opp-microvolt = <1025000>;
239 clock-latency-ns = <290000>;
240 turbo-mode;
245 Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
250 #address-cells = <1>;
251 #size-cells = <0>;
256 next-level-cache = <&L2>;
258 clock-names = "cpu";
259 cpu-supply = <&cpu_supply0>;
260 operating-points-v2 = <&cpu_opp_table>;
266 next-level-cache = <&L2>;
268 clock-names = "cpu";
269 cpu-supply = <&cpu_supply1>;
270 operating-points-v2 = <&cpu_opp_table>;
276 next-level-cache = <&L2>;
278 clock-names = "cpu";
279 cpu-supply = <&cpu_supply2>;
280 operating-points-v2 = <&cpu_opp_table>;
286 next-level-cache = <&L2>;
288 clock-names = "cpu";
289 cpu-supply = <&cpu_supply3>;
290 operating-points-v2 = <&cpu_opp_table>;
295 compatible = "operating-points-v2";
298 * Missing opp-shared property means CPUs switch DVFS states
302 opp-1000000000 {
303 opp-hz = /bits/ 64 <1000000000>;
304 opp-microvolt = <975000 970000 985000>;
305 opp-microamp = <70000>;
306 clock-latency-ns = <300000>;
307 opp-suspend;
309 opp-1100000000 {
310 opp-hz = /bits/ 64 <1100000000>;
311 opp-microvolt = <1000000 980000 1010000>;
312 opp-microamp = <80000>;
313 clock-latency-ns = <310000>;
315 opp-1200000000 {
316 opp-hz = /bits/ 64 <1200000000>;
317 opp-microvolt = <1025000>;
318 opp-microamp = <90000;
319 lock-latency-ns = <290000>;
320 turbo-mode;
325 Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
330 #address-cells = <1>;
331 #size-cells = <0>;
334 compatible = "arm,cortex-a7";
336 next-level-cache = <&L2>;
338 clock-names = "cpu";
339 cpu-supply = <&cpu_supply0>;
340 operating-points-v2 = <&cluster0_opp>;
344 compatible = "arm,cortex-a7";
346 next-level-cache = <&L2>;
348 clock-names = "cpu";
349 cpu-supply = <&cpu_supply0>;
350 operating-points-v2 = <&cluster0_opp>;
354 compatible = "arm,cortex-a15";
356 next-level-cache = <&L2>;
358 clock-names = "cpu";
359 cpu-supply = <&cpu_supply1>;
360 operating-points-v2 = <&cluster1_opp>;
364 compatible = "arm,cortex-a15";
366 next-level-cache = <&L2>;
368 clock-names = "cpu";
369 cpu-supply = <&cpu_supply1>;
370 operating-points-v2 = <&cluster1_opp>;
375 compatible = "operating-points-v2";
376 opp-shared;
378 opp-1000000000 {
379 opp-hz = /bits/ 64 <1000000000>;
380 opp-microvolt = <975000 970000 985000>;
381 opp-microamp = <70000>;
382 clock-latency-ns = <300000>;
383 opp-suspend;
385 opp-1100000000 {
386 opp-hz = /bits/ 64 <1100000000>;
387 opp-microvolt = <1000000 980000 1010000>;
388 opp-microamp = <80000>;
389 clock-latency-ns = <310000>;
391 opp-1200000000 {
392 opp-hz = /bits/ 64 <1200000000>;
393 opp-microvolt = <1025000>;
394 opp-microamp = <90000>;
395 clock-latency-ns = <290000>;
396 turbo-mode;
401 compatible = "operating-points-v2";
402 opp-shared;
404 opp-1300000000 {
405 opp-hz = /bits/ 64 <1300000000>;
406 opp-microvolt = <1050000 1045000 1055000>;
407 opp-microamp = <95000>;
408 clock-latency-ns = <400000>;
409 opp-suspend;
411 opp-1400000000 {
412 opp-hz = /bits/ 64 <1400000000>;
413 opp-microvolt = <1075000>;
414 opp-microamp = <100000>;
415 clock-latency-ns = <400000>;
417 opp-1500000000 {
418 opp-hz = /bits/ 64 <1500000000>;
419 opp-microvolt = <1100000 1010000 1110000>;
420 opp-microamp = <95000>;
421 clock-latency-ns = <400000>;
422 turbo-mode;
432 compatible = "vendor,cpu-type";
435 vcc0-supply = <&cpu_supply0>;
436 vcc1-supply = <&cpu_supply1>;
437 vcc2-supply = <&cpu_supply2>;
438 operating-points-v2 = <&cpu0_opp_table>;
443 compatible = "operating-points-v2";
444 opp-shared;
446 opp-1000000000 {
447 opp-hz = /bits/ 64 <1000000000>;
448 opp-microvolt = <970000>, /* Supply 0 */
451 opp-microamp = <70000>, /* Supply 0 */
454 clock-latency-ns = <300000>;
459 opp-1000000000 {
460 opp-hz = /bits/ 64 <1000000000>;
461 opp-microvolt = <975000 970000 985000>, /* Supply 0 */
464 opp-microamp = <70000>, /* Supply 0 */
467 clock-latency-ns = <300000>;
472 opp-1000000000 {
473 opp-hz = /bits/ 64 <1000000000>;
474 opp-microvolt = <975000 970000 985000>, /* Supply 0 */
477 opp-microamp = <70000>, /* Supply 0 */
480 clock-latency-ns = <300000>;
485 Example 5: opp-supported-hw
491 compatible = "arm,cortex-a7";
494 cpu-supply = <&cpu_supply>
495 operating-points-v2 = <&cpu0_opp_table_slow>;
500 compatible = "operating-points-v2";
501 opp-shared;
503 opp-600000000 {
508 opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
509 opp-hz = /bits/ 64 <600000000>;
513 opp-800000000 {
516 * - cuts: only one, 6th cut (represented by 6th bit).
517 * - substrate: supports 16 different substrate versions
518 * - process: supports 9 different process versions
520 opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
521 opp-hz = /bits/ 64 <800000000>;
525 opp-900000000 {
528 * - All cuts and substrate where process version is 0x2.
529 * - All cuts and process where substrate version is 0x2.
531 opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, <0xFFFFFFFF 0x01 0xFFFFFFFF>
532 opp-hz = /bits/ 64 <900000000>;
538 Example 6: opp-microvolt-<name>, opp-microamp-<name>:
544 compatible = "arm,cortex-a7";
547 operating-points-v2 = <&cpu0_opp_table>;
552 compatible = "operating-points-v2";
553 opp-shared;
555 opp-1000000000 {
556 opp-hz = /bits/ 64 <1000000000>;
557 opp-microvolt-slow = <915000 900000 925000>;
558 opp-microvolt-fast = <975000 970000 985000>;
559 opp-microamp-slow = <70000>;
560 opp-microamp-fast = <71000>;
563 opp-1200000000 {
564 opp-hz = /bits/ 64 <1200000000>;
565 opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
567 opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
569 opp-microamp = <70000>; /* Will be used for both slow/fast */
574 Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
579 #address-cells = <2>;
580 #size-cells = <0>;
583 compatible = "arm,cortex-a53";
585 next-level-cache = <&A53_L2>;
587 operating-points-v2 = <&cpu_opp0_table>;
590 compatible = "arm,cortex-a53";
592 next-level-cache = <&A53_L2>;
594 operating-points-v2 = <&cpu_opp0_table>;
597 compatible = "arm,cortex-a53";
599 next-level-cache = <&A53_L2>;
601 operating-points-v2 = <&cpu_opp1_table>;
604 compatible = "arm,cortex-a53";
606 next-level-cache = <&A53_L2>;
608 operating-points-v2 = <&cpu_opp1_table>;
614 compatible = "operating-points-v2";
615 opp-shared;
619 compatible = "operating-points-v2";
620 opp-shared;