Lines Matching +full:syscon +full:- +full:phy +full:- +full:mode

1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
5 $id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml#
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11   - Emil Renner Berthing <kernel@esmil.dk>
12   - Samin Guo <samin.guo@starfivetech.com>
19           - starfive,jh7110-dwmac
21     - compatible
26       - enum:
27           - starfive,jh7110-dwmac
28       - const: snps,dwmac-5.20
35       - description: GMAC main clock
36       - description: GMAC AHB clock
37       - description: PTP clock
38       - description: TX clock
39       - description: GTX clock
41   clock-names:
43       - const: stmmaceth
44       - const: pclk
45       - const: ptp_ref
46       - const: tx
47       - const: gtx
53   interrupt-names:
59       - description: MAC Reset signal.
60       - description: AHB Reset signal.
62   reset-names:
64       - const: stmmaceth
65       - const: ahb
67   starfive,tx-use-rgmii-clk:
72   starfive,syscon:
73     $ref: /schemas/types.yaml#/definitions/phandle-array
75       - items:
76           - description: phandle to syscon that configures phy mode
77           - description: Offset of phy mode selection
78           - description: Shift of phy mode selection
80       A phandle to syscon with two arguments that configure phy mode.
81       The argument one is the offset of phy mode selection, the
82       argument two is the shift of phy mode selection.
85   - compatible
86   - reg
87   - clocks
88   - clock-names
89   - interrupts
90   - interrupt-names
91   - resets
92   - reset-names
95   - $ref: snps,dwmac.yaml#
100   - |
102         compatible = "starfive,jh7110-dwmac", "snps,dwmac-5.20";
106         clock-names = "stmmaceth", "pclk", "ptp_ref",
109         reset-names = "stmmaceth", "ahb";
111         interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
112         phy-mode = "rgmii-id";
113         snps,multicast-filter-bins = <64>;
114         snps,perfect-filter-entries = <8>;
115         rx-fifo-depth = <2048>;
116         tx-fifo-depth = <2048>;
117         snps,fixed-burst;
118         snps,no-pbl-x8;
121         snps,axi-config = <&stmmac_axi_setup>;
122         snps,en-tx-lpi-clockgating;
125         starfive,syscon = <&aon_syscon 0xc 0x12>;
126         phy-handle = <&phy0>;
129             #address-cells = <1>;
130             #size-cells = <0>;
131             compatible = "snps,dwmac-mdio";
133             phy0: ethernet-phy@0 {
138         stmmac_axi_setup: stmmac-axi-config {