Lines Matching +full:force +full:- +full:external +full:- +full:phy

1 * Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
4 - compatible : Should be "smsc,lan<model>", "smsc,lan9115"
5 - reg : Address and length of the io space for SMSC LAN
6 - interrupts : one or two interrupt specifiers
7   - The first interrupt is the SMSC LAN interrupt line
8   - The second interrupt (if present) is the PME (power
11 - phy-mode : See ethernet.txt file in the same directory
14 - reg-shift : Specify the quantity to shift the register offsets by
15 - reg-io-width : Specify the size (in bytes) of the IO accesses that
18 - smsc,irq-active-high : Indicates the IRQ polarity is active-high
19 - smsc,irq-push-pull : Indicates the IRQ type is push-pull
20 - smsc,force-internal-phy : Forces SMSC LAN controller to use
21   internal PHY
22 - smsc,force-external-phy : Forces SMSC LAN controller to use
23   external PHY
24 - smsc,save-mac-address : Indicates that mac address needs to be saved
26 - reset-gpios : a GPIO line connected to the RESET (active low) signal
28   out of reset at power-on, but if it is under program control, this
30 - vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies
37 	phy-mode = "mii";
38 	interrupt-parent = <&gpio1>;
40 	reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
41 	reg-io-width = <4>;
42 	smsc,irq-push-pull;