Lines Matching +full:sgmii +full:- +full:phy

10 - compatible: Should be
11 		"mediatek,mt2701-eth": for MT2701 SoC
12 		"mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC
13 		"mediatek,mt7622-eth": for MT7622 SoC
14 		"mediatek,mt7629-eth": for MT7629 SoC
15 		"ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC
16 - reg: Address and length of the register set for the device
17 - interrupts: Should contain the three frame engines interrupts in numeric
19 - clocks: the clock used by the core
20 - clock-names: the names of the clock listed in the clocks property. These are
28 - power-domains: phandle to the power domain that the ethernet is part of
29 - resets: Should contain phandles to the ethsys reset signals
30 - reset-names: Should contain the names of reset signal listed in the resets
33 - mediatek,ethsys: phandle to the syscon node that handles the port setup
34 - mediatek,infracfg: phandle to the syscon node that handles the path from
35 	GMAC to PHY variants, which is required for MT7629 SoC.
36 - mediatek,sgmiisys: a list of phandles to the syscon node that handles the
37 	SGMII setup which is required for those SoCs equipped with SGMII such
38 	as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared
39 	by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed
41 - mediatek,pctl: phandle to the syscon node that handles the ports slew rate
47 - compatible: Should be "mediatek,eth-mac"
48 - reg: The number of the MAC
49 - phy-handle: see ethernet.txt file in the same directory and
50 	the phy-mode "trgmii" required being provided when reg
51 	is equal to 0 and the MAC uses fixed-link to connect
57 	compatible = "mediatek,mt7623-eth";
63 	clock-names = "ethif", "esw", "gp2", "gp1";
67 	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
69 	reset-names = "eth";
72 	#address-cells = <1>;
73 	#size-cells = <0>;
76 		compatible = "mediatek,eth-mac";
78 		phy-handle = <&phy0>;
82 		compatible = "mediatek,eth-mac";
84 		phy-handle = <&phy1>;
87 	mdio-bus {
88 		phy0: ethernet-phy@0 {
90 			phy-mode = "rgmii";
93 		phy1: ethernet-phy@1 {
95 			phy-mode = "rgmii";