Lines Matching +full:rclk +full:-

4 - compatible: "faraday,ftgmac100"
10      - "aspeed,ast2400-mac"
11      - "aspeed,ast2500-mac"
12      - "aspeed,ast2600-mac"
14 - reg: Address and length of the register set for the device
15 - interrupts: Should contain ethernet controller interrupt
18 - phy-handle: See ethernet.txt file in the same directory.
19 - phy-mode: See ethernet.txt file in the same directory. If the property is
22 - use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes
23   rmii (100bT) but kept as a separate property in case NC-SI grows support
25 - no-hw-checksum: Used to disable HW checksum support. Here for backward
28 - clocks: In accordance with the generic clock bindings. Must describe the MAC
29   IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The
31 - clock-names:
33       - "MACCLK": The MAC IP clock
34       - "RCLK": Clock gate for the RMII RCLK
37 - mdio: See mdio.txt file in the same directory.
42 		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
45 		use-ncsi;
48 Example with phy-handle:
51 		compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
55 		phy-handle = <&phy>;
56 		phy-mode = "rgmii";
59 			#address-cells = <1>;
60 			#size-cells = <0>;
62 			phy: ethernet-phy@1 {
63 				compatible = "ethernet-phy-ieee802.3-c22";