Lines Matching full:sja1105
1 NXP SJA1105 switch driver
24 - sja1105,role-mac:
25 - sja1105,role-phy:
32 - In the case of MII or RMII it specifies whether the SJA1105 port is a
37 1. If sja1105,role-mac is specified, and the phy-mode property is one
40 is the PHY. The SJA1105 MAC does not apply any internal delays.
41 2. If sja1105,role-phy is specified, and the phy-mode property is one
43 is the SJA1105 MAC (if hardware-supported). This is only supported
49 These properties are required, for example, in the case where SJA1105
51 to have sja1105,role-mac, while the other sja1105,role-phy.
59 The SJA1105 SPI interface requires a CS-to-CLK time (t2 in UM10944) of at least
73 sja1105@1 {
90 /* Implicit "sja1105,role-mac;" */
98 /* Implicit "sja1105,role-mac;" */
106 /* Implicit "sja1105,role-mac;" */
114 /* Implicit "sja1105,role-mac;" */
121 /* Implicit "sja1105,role-phy;" */