Lines Matching +full:4 +full:- +full:switch

1 Microchip Ocelot switch driver family
5 -----
9 - VSC9959 (Felix)
10 - VSC9953 (Seville)
12 The VSC9959 switch is found in the NXP LS1028A. It is a PCI device, part of the
13 larger ENETC root complex. As a result, the ethernet-switch node is a sub-node
25 For the external switch ports, depending on board configuration, "phy-mode" and
26 "phy-handle" are populated by board specific device tree instances. Ports 4 and
32 By default, in fsl-ls1028a.dtsi, the NPI port is assigned to the internal
33 2.5Gbps port@4, but can be moved to the 1Gbps port@5, depending on the specific
34 use case.  Moving the NPI port to an external switch port is hardware possible,
39 Any port can be disabled (and in fsl-ls1028a.dtsi, they are indeed all disabled
40 by default, and should be enabled on a per-board basis). But if any external
41 switch port is enabled at all, the ENETC PF2 (enetc_port2) should be enabled as
49 * phy_mode = "internal": on ports 4 and 5
53 * phy_mode = "2500base-x": on ports 0, 1, 2, 3
65 		ethernet-switch@0,5 {
71 				#address-cells = <1>;
72 				#size-cells = <0>;
96 				port@4 {
97 					reg = <4>;
99 					phy-mode = "internal";
101 					fixed-link {
103 						full-duplex;
107 				/* Non-tagging CPU port */
110 					phy-mode = "internal";
113 					fixed-link {
115 						full-duplex;
123 The VSC9953 switch is found inside NXP T1040. It is a platform device with the
126 - compatible:
127 	Must be "mscc,vsc9953-switch".
133 * phy_mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
134 * phy_mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
139 	ethernet-switch@800000 {
140 		#address-cells = <0x1>;
141 		#size-cells = <0x0>;
142 		compatible = "mscc,vsc9953-switch";
143 		little-endian;
147 			#address-cells = <0x1>;
148 			#size-cells = <0x0>;
170 			port@4 {
192 				phy-mode = "internal";
195 				fixed-link {
197 					full-duplex;
203 				phy-mode = "internal";
206 				fixed-link {
208 					full-duplex;