Lines Matching +full:push +full:- +full:pull

5 - compatible : should be one of "nxp,sja1000", "technologic,sja1000".
7 - reg : should specify the chip select, address offset and size required
10 - interrupts: property with a value describing the interrupt source
15 - reg-io-width : Specify the size (in bytes) of the IO accesses that
20 - nxp,external-clock-frequency : Frequency of the external oscillator
25 - nxp,tx-output-mode : operation mode of the TX output control logic:
26 	<0x0> : bi-phase output mode
31 - nxp,tx-output-config : TX output pin configuration:
33 	<0x02> : TX0 pull-down (default)
34 	<0x04> : TX0 pull-up
35 	<0x06> : TX0 push-pull
37 	<0x10> : TX1 pull-down
38 	<0x20> : TX1 pull-up
39 	<0x30> : TX1 push-pull
41 - nxp,clock-out-frequency : clock frequency in Hz on the CLKOUT pin.
45 - nxp,no-comparator-bypass : Allows to disable the CAN input comparator.
55 	interrupt-parent = <&mpic>;
56 	nxp,external-clock-frequency = <16000000>;