Lines Matching +full:tx1 +full:- +full:0
8 - compatible : should be "bosch,cc770" for the CC770 and "intc,82527"
11 - reg : should specify the chip select, address offset and size required
12 to map the registers of the controller. The size is usually 0x80.
14 - interrupts : property with a value describing the interrupt source
19 - bosch,external-clock-frequency : frequency of the external oscillator
24 - bosch,clock-out-frequency : slock frequency in Hz on the CLKOUT pin.
25 If not specified or if the specified value is 0, the CLKOUT pin
28 - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified,
31 - bosch,disconnect-rx0-input : see data sheet.
33 - bosch,disconnect-rx1-input : see data sheet.
35 - bosch,disconnect-tx1-output : see data sheet.
37 - bosch,polarity-dominant : see data sheet.
39 - bosch,divide-memory-clock : see data sheet.
41 - bosch,iso-low-speed-mux : see data sheet.
49 reg = <3 0x100 0x80>;
50 interrupts = <2 0>;
51 interrupt-parent = <&mpic>;
52 bosch,external-clock-frequency = <16000000>;