Lines Matching +full:genet +full:- +full:mdio +full:- +full:v4
1 * Broadcom BCM7xxx Ethernet Controller (GENET)
4 - compatible: should contain one of "brcm,genet-v1", "brcm,genet-v2",
5 "brcm,genet-v3", "brcm,genet-v4", "brcm,genet-v5", "brcm,bcm2711-genet-v5" or
6 "brcm,bcm7712-genet-v5".
7 - reg: address and length of the register set for the device
8 - interrupts and/or interrupts-extended: must be two cells, the first cell
11 optional third interrupt cell for Wake-on-LAN can be specified.
12 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
14 - phy-mode: see ethernet.txt file in the same directory
15 - #address-cells: should be 1
16 - #size-cells: should be 1
19 - clocks: When provided, must be two phandles to the functional clocks nodes
20 of the GENET block. The first phandle is the main GENET clock used during
21 normal operation, while the second phandle is the Wake-on-LAN clock.
22 - clock-names: When provided, names of the functional clock phandles, first
23 name should be "enet" and second should be "enet-wol".
25 - phy-handle: See ethernet.txt file in the same directory; used to describe
28 - fixed-link: When the GENET interface is connected to a MoCA hardware block or
29 when operating in a RGMII to RGMII type of connection, or when the MDIO bus is
31 See Documentation/devicetree/bindings/net/fixed-link.txt for information on
36 - mdio bus node: this node should always be present regardless of the PHY
37 configuration of the GENET instance
39 MDIO bus node required properties:
41 - compatible: should contain one of "brcm,genet-mdio-v1", "brcm,genet-mdio-v2"
42 "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5", the version
43 has to match the parent node compatible property (e.g: brcm,genet-v4 pairs
44 with brcm,genet-mdio-v4)
45 - reg: address and length relative to the parent node base register address
46 - #address-cells: address cell for MDIO bus addressing, should be 1
47 - #size-cells: size of the cells for MDIO bus addressing, should be 0
57 phy-mode = "internal";
58 phy-handle = <&phy1>;
59 mac-address = [ 00 10 18 36 23 1a ];
60 compatible = "brcm,genet-v4";
61 #address-cells = <0x1>;
62 #size-cells = <0x1>;
66 mdio@e14 {
67 compatible = "brcm,genet-mdio-v4";
68 #address-cells = <0x1>;
69 #size-cells = <0x0>;
72 phy1: ethernet-phy@1 {
73 max-speed = <1000>;
75 compatible = "ethernet-phy-ieee802.3-c22";
83 phy-mode = "moca";
84 fixed-link = <1 0 1000 0 0>;
85 mac-address = [ 00 10 18 36 24 1a ];
86 compatible = "brcm,genet-v4";
87 #address-cells = <0x1>;
88 #size-cells = <0x1>;
92 mdio@e14 {
93 compatible = "brcm,genet-mdio-v4";
94 #address-cells = <0x1>;
95 #size-cells = <0x0>;
101 External MDIO-connected Gigabit PHY/switch:
104 phy-mode = "rgmii";
105 phy-handle = <&phy0>;
106 mac-address = [ 00 10 18 36 26 1a ];
107 compatible = "brcm,genet-v4";
108 #address-cells = <0x1>;
109 #size-cells = <0x1>;
113 mdio@e14 {
114 compatible = "brcm,genet-mdio-v4";
115 #address-cells = <0x1>;
116 #size-cells = <0x0>;
119 phy0: ethernet-phy@0 {
120 max-speed = <1000>;
122 compatible = "ethernet-phy-ieee802.3-c22";