Lines Matching +full:first +full:- +full:data +full:- +full:gpios

7 by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
13 	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
15 	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
17 	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
19 	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
21 	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
23 	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
25 	- "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific
28 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
32 * samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
34   data rate mode operation. Refer notes below for the order of the cells and the
37 * samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
39   data rate mode operation. Refer notes below for the order of the cells and the
41 * samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
44   Notes for the sdr-timing and ddr-timing values:
47       - First Cell: CIU clock phase shift value for tx mode.
48       - Second Cell: CIU clock phase shift value for rx mode.
51       - valid value for tx phase shift and rx phase shift is 0 to 7.
52       - when CIU clock divider value is set to 3, all possible 8 phase shift
54       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
57 * samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
60 Required properties for a slot (Deprecated - Recommend to use one slot per host):
62 * gpios: specifies a list of gpios used for command, clock and data bus. The
63   first gpio is the command line and the second gpio is the clock line. The
64   rest of the gpios (depending on the bus-width property) are the data lines in
67 (Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
75 		compatible = "samsung,exynos5250-dw-mshc";
78 		#address-cells = <1>;
79 		#size-cells = <0>;
83 		cap-mmc-highspeed;
84 		cap-sd-highspeed;
85 		broken-cd;
86 		fifo-depth = <0x80>;
87 		card-detect-delay = <200>;
88 		samsung,dw-mshc-ciu-div = <3>;
89 		samsung,dw-mshc-sdr-timing = <2 3>;
90 		samsung,dw-mshc-ddr-timing = <1 2>;
91 		samsung,dw-mshc-hs400-timing = <0 2>;
92 		samsung,read-strobe-delay = <90>;
93 		bus-width = <8>;