Lines Matching +full:exynos +full:- +full:bus

1 * Samsung Exynos specific extensions to the Synopsys Designware Mobile
7 by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific
13 	- "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210
15 	- "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412
17 	- "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250
19 	- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
21 	- "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
23 	- "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
25 	- "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific
28 * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
32 * samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
37 * samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value
41 * samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase
44   Notes for the sdr-timing and ddr-timing values:
47       - First Cell: CIU clock phase shift value for tx mode.
48       - Second Cell: CIU clock phase shift value for rx mode.
51       - valid value for tx phase shift and rx phase shift is 0 to 7.
52       - when CIU clock divider value is set to 3, all possible 8 phase shift
54       - if CIU clock divider value is 0 (that is divide by 1), both tx and rx
57 * samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
60 Required properties for a slot (Deprecated - Recommend to use one slot per host):
62 * gpios: specifies a list of gpios used for command, clock and data bus. The
64   rest of the gpios (depending on the bus-width property) are the data lines in
67 (Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
75 		compatible = "samsung,exynos5250-dw-mshc";
78 		#address-cells = <1>;
79 		#size-cells = <0>;
83 		cap-mmc-highspeed;
84 		cap-sd-highspeed;
85 		broken-cd;
86 		fifo-depth = <0x80>;
87 		card-detect-delay = <200>;
88 		samsung,dw-mshc-ciu-div = <3>;
89 		samsung,dw-mshc-sdr-timing = <2 3>;
90 		samsung,dw-mshc-ddr-timing = <1 2>;
91 		samsung,dw-mshc-hs400-timing = <0 2>;
92 		samsung,read-strobe-delay = <90>;
93 		bus-width = <8>;