Lines Matching +full:interrupt +full:- +full:driven

4 which provides high-throughput LDPC and Turbo Code implementations.
6 customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
12 - compatible: Must be "xlnx,sd-fec-1.1"
13 - clock-names : List of input clock names from the following:
14     - "core_clk", Main processing clock for processing core (required)
15     - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
16     - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
17     - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
18     - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
19     - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
20     - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
21     - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
22 - clocks : Clock phandles (see clock_bindings.txt for details).
23 - reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
25 - xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
27 - xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
28   driven with a fixed value and is not present on the device, a value of 1
31 - xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
34 - xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
35   driven with a fixed value and is not present on the device, a value of 1
38 - xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
42 - interrupts: should contain SDFEC interrupt number
45 ---------------------------------------
46 	sd_fec_0: sd-fec@a0040000 {
47 		compatible = "xlnx,sd-fec-1.1";
48 …clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m…
51 		interrupt-parent = <&axi_intc>;
53 		xlnx,sdfec-code = "ldpc";
54 		xlnx,sdfec-din-words = <0>;
55 		xlnx,sdfec-din-width = <2>;
56 		xlnx,sdfec-dout-words = <0>;
57 		xlnx,sdfec-dout-width = <1>;