Lines Matching full:vout1

32   rohm,vout1-en-low:
34       BD9576 and BD9573 VOUT1 regulator enable state can be individually
35       controlled by a GPIO. This is dictated by state of vout1-en pin during
36       the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1
37       enable state is controlled via this pin. Set this property if vout1-en
41   rohm,vout1-en-gpios:
43       GPIO specifier to specify the GPIO connected to vout1-en for vout1 ON/OFF
95             rohm,vout1-en-low;
96             rohm,vout1-en-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;