Lines Matching +full:differential +full:- +full:input
11 - compatible: "rockchip,rk805"
12 - compatible: "rockchip,rk808"
13 - compatible: "rockchip,rk809"
14 - compatible: "rockchip,rk817"
15 - compatible: "rockchip,rk818"
16 - reg: I2C slave address
17 - interrupts: the interrupt outputs of the controller.
18 - #clock-cells: from common clock binding; shall be set to 1 (multiple clock
19 outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
22 - clock-output-names: From common clock binding to override the
24 - rockchip,system-power-controller: Telling whether or not this pmic is controlling
26 - wakeup-source: Device can be used as a wakeup source.
29 - vcc1-supply: The input supply for DCDC_REG1
30 - vcc2-supply: The input supply for DCDC_REG2
31 - vcc3-supply: The input supply for DCDC_REG3
32 - vcc4-supply: The input supply for DCDC_REG4
33 - vcc5-supply: The input supply for LDO_REG1 and LDO_REG2
34 - vcc6-supply: The input supply for LDO_REG3
37 - vcc1-supply: The input supply for DCDC_REG1
38 - vcc2-supply: The input supply for DCDC_REG2
39 - vcc3-supply: The input supply for DCDC_REG3
40 - vcc4-supply: The input supply for DCDC_REG4
41 - vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
42 - vcc7-supply: The input supply for LDO_REG3 and LDO_REG7
43 - vcc8-supply: The input supply for SWITCH_REG1
44 - vcc9-supply: The input supply for LDO_REG4 and LDO_REG5
45 - vcc10-supply: The input supply for LDO_REG6
46 - vcc11-supply: The input supply for LDO_REG8
47 - vcc12-supply: The input supply for SWITCH_REG2
48 - dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
54 - vcc1-supply: The input supply for DCDC_REG1
55 - vcc2-supply: The input supply for DCDC_REG2
56 - vcc3-supply: The input supply for DCDC_REG3
57 - vcc4-supply: The input supply for DCDC_REG4
58 - vcc5-supply: The input supply for LDO_REG1, LDO_REG2, LDO_REG3
59 - vcc6-supply: The input supply for LDO_REG4, LDO_REG5, LDO_REG6
60 - vcc7-supply: The input supply for LDO_REG7, LDO_REG8, LDO_REG9
63 - vcc8-supply: The input supply for SWITCH_REG1
64 - vcc9-supply: The input supply for DCDC_REG5, SWITCH_REG2
67 - clocks: The input clock for the audio codec
68 - clock-names: The clock name for the codec clock. Should be "mclk".
69 - #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0.
71 - vcc8-supply: The input supply for BOOST
72 - vcc9-supply: The input supply for OTG_SWITCH
73 - codec: The child node for the codec to hold additional properties.
77 - rockchip,mic-in-differential: Telling if the microphone uses differential
81 - vcc1-supply: The input supply for DCDC_REG1
82 - vcc2-supply: The input supply for DCDC_REG2
83 - vcc3-supply: The input supply for DCDC_REG3
84 - vcc4-supply: The input supply for DCDC_REG4
85 - boost-supply: The input supply for DCDC_BOOST
86 - vcc6-supply: The input supply for LDO_REG1 and LDO_REG2
87 - vcc7-supply: The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
88 - vcc8-supply: The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
89 - vcc9-supply: The input supply for LDO_REG9 and SWITCH_REG
90 - h_5v-supply: The input supply for HDMI_SWITCH
91 - usb-supply: The input supply for OTG_SWITCH
97 regulator-name {
105 - DCDC_REGn
106 - valid values for n are 1 to 4.
107 - LDO_REGn
108 - valid values for n are 1 to 3
114 - DCDC_REGn
115 - valid values for n are 1 to 4.
116 - LDO_REGn
117 - valid values for n are 1 to 8.
118 - SWITCH_REGn
119 - valid values for n are 1 to 2
125 - DCDC_REGn
126 - valid values for n are 1 to 5 for RK809.
127 - valid values for n are 1 to 4 for RK817.
128 - LDO_REGn
129 - valid values for n are 1 to 9 for RK809.
130 - valid values for n are 1 to 9 for RK817.
131 - SWITCH_REGn
132 - valid values for n are 1 to 2 for RK809.
133 - BOOST for RK817
134 - OTG_SWITCH for RK817
140 - DCDC_REGn
141 - valid values for n are 1 to 4.
142 - LDO_REGn
143 - valid values for n are 1 to 9.
144 - SWITCH_REG
145 - HDMI_SWITCH
146 - OTG_SWITCH
152 - reset
153 - power down
154 - sleep
163 clock-output-names = "xin32k", "rk808-clkout2";
164 interrupt-parent = <&gpio0>;
166 pinctrl-names = "default";
167 pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
168 dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
171 rockchip,system-power-controller;
172 wakeup-source;
173 #clock-cells = <1>;
175 vcc8-supply = <&vcc_18>;
176 vcc9-supply = <&vcc_io>;
177 vcc10-supply = <&vcc_io>;
178 vcc12-supply = <&vcc_io>;
179 vddio-supply = <&vccio_pmu>;
183 regulator-always-on;
184 regulator-boot-on;
185 regulator-min-microvolt = <750000>;
186 regulator-max-microvolt = <1300000>;
187 regulator-name = "vdd_arm";
191 regulator-always-on;
192 regulator-boot-on;
193 regulator-min-microvolt = <850000>;
194 regulator-max-microvolt = <1250000>;
195 regulator-name = "vdd_gpu";
199 regulator-always-on;
200 regulator-boot-on;
201 regulator-name = "vcc_ddr";
205 regulator-always-on;
206 regulator-boot-on;
207 regulator-min-microvolt = <3300000>;
208 regulator-max-microvolt = <3300000>;
209 regulator-name = "vcc_io";
213 regulator-always-on;
214 regulator-boot-on;
215 regulator-min-microvolt = <3300000>;
216 regulator-max-microvolt = <3300000>;
217 regulator-name = "vccio_pmu";
221 regulator-always-on;
222 regulator-boot-on;
223 regulator-min-microvolt = <3300000>;
224 regulator-max-microvolt = <3300000>;
225 regulator-name = "vcc_tp";
229 regulator-always-on;
230 regulator-boot-on;
231 regulator-min-microvolt = <1000000>;
232 regulator-max-microvolt = <1000000>;
233 regulator-name = "vdd_10";
237 regulator-always-on;
238 regulator-boot-on;
239 regulator-min-microvolt = <1800000>;
240 regulator-max-microvolt = <1800000>;
241 regulator-name = "vcc18_lcd";
245 regulator-always-on;
246 regulator-boot-on;
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <3300000>;
249 regulator-name = "vccio_sd";
253 regulator-always-on;
254 regulator-boot-on;
255 regulator-min-microvolt = <1000000>;
256 regulator-max-microvolt = <1000000>;
257 regulator-name = "vdd10_lcd";
261 regulator-always-on;
262 regulator-boot-on;
263 regulator-min-microvolt = <1800000>;
264 regulator-max-microvolt = <1800000>;
265 regulator-name = "vcc_18";
269 regulator-always-on;
270 regulator-boot-on;
271 regulator-min-microvolt = <3300000>;
272 regulator-max-microvolt = <3300000>;
273 regulator-name = "vcca_codec";
277 regulator-always-on;
278 regulator-boot-on;
279 regulator-name = "vcc_wl";
283 regulator-always-on;
284 regulator-boot-on;
285 regulator-name = "vcc_lcd";
293 interrupt-parent = <&gpio0>;
295 clock-output-names = "rk808-clkout1", "xin32k";
296 clock-names = "mclk";
298 pinctrl-names = "default";
299 pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
300 wakeup-source;
301 #clock-cells = <1>;
302 #sound-dai-cells = <0>;
304 vcc1-supply = <&vccsys>;
305 vcc2-supply = <&vccsys>;
306 vcc3-supply = <&vccsys>;
307 vcc4-supply = <&vccsys>;
308 vcc5-supply = <&vccsys>;
309 vcc6-supply = <&vccsys>;
310 vcc7-supply = <&vccsys>;
314 regulator-name = "vdd_logic";
315 regulator-min-microvolt = <950000>;
316 regulator-max-microvolt = <1150000>;
317 regulator-ramp-delay = <6001>;
318 regulator-always-on;
319 regulator-boot-on;
321 regulator-state-mem {
322 regulator-on-in-suspend;
323 regulator-suspend-microvolt = <950000>;
328 regulator-name = "vdd_arm";
329 regulator-min-microvolt = <950000>;
330 regulator-max-microvolt = <1350000>;
331 regulator-ramp-delay = <6001>;
332 regulator-always-on;
333 regulator-boot-on;
335 regulator-state-mem {
336 regulator-off-in-suspend;
337 regulator-suspend-microvolt = <950000>;
342 regulator-name = "vcc_ddr";
343 regulator-always-on;
344 regulator-boot-on;
346 regulator-state-mem {
347 regulator-on-in-suspend;
352 regulator-name = "vcc_3v3";
353 regulator-min-microvolt = <3300000>;
354 regulator-max-microvolt = <3300000>;
355 regulator-always-on;
356 regulator-boot-on;
358 regulator-state-mem {
359 regulator-off-in-suspend;
360 regulator-suspend-microvolt = <3300000>;
365 regulator-name = "vcc_1v8";
366 regulator-min-microvolt = <1800000>;
367 regulator-max-microvolt = <1800000>;
368 regulator-always-on;
369 regulator-boot-on;
371 regulator-state-mem {
372 regulator-on-in-suspend;
373 regulator-suspend-microvolt = <1800000>;
378 regulator-name = "vdd_1v0";
379 regulator-min-microvolt = <1000000>;
380 regulator-max-microvolt = <1000000>;
381 regulator-always-on;
382 regulator-boot-on;
384 regulator-state-mem {
385 regulator-on-in-suspend;
386 regulator-suspend-microvolt = <1000000>;
391 regulator-name = "vcc3v3_pmu";
392 regulator-min-microvolt = <3300000>;
393 regulator-max-microvolt = <3300000>;
394 regulator-always-on;
395 regulator-boot-on;
397 regulator-state-mem {
398 regulator-on-in-suspend;
399 regulator-suspend-microvolt = <3300000>;
404 regulator-name = "vccio_sd";
405 regulator-min-microvolt = <1800000>;
406 regulator-max-microvolt = <3300000>;
407 regulator-always-on;
408 regulator-boot-on;
410 regulator-state-mem {
411 regulator-on-in-suspend;
412 regulator-suspend-microvolt = <3300000>;
417 regulator-name = "vcc_sd";
418 regulator-min-microvolt = <3300000>;
419 regulator-max-microvolt = <3300000>;
420 regulator-boot-on;
422 regulator-state-mem {
423 regulator-on-in-suspend;
424 regulator-suspend-microvolt = <3300000>;
429 regulator-name = "vcc_bl";
430 regulator-min-microvolt = <3300000>;
431 regulator-max-microvolt = <3300000>;
433 regulator-state-mem {
434 regulator-off-in-suspend;
435 regulator-suspend-microvolt = <3300000>;
440 regulator-name = "vcc_lcd";
441 regulator-min-microvolt = <2800000>;
442 regulator-max-microvolt = <2800000>;
444 regulator-state-mem {
445 regulator-off-in-suspend;
446 regulator-suspend-microvolt = <2800000>;
451 regulator-name = "vcc_cam";
452 regulator-min-microvolt = <3000000>;
453 regulator-max-microvolt = <3000000>;
455 regulator-state-mem {
456 regulator-off-in-suspend;
457 regulator-suspend-microvolt = <3000000>;
463 rockchip,mic-in-differential;