Lines Matching +full:hs +full:- +full:usb +full:- +full:if

1 OMAP HS USB Host
5 - compatible: should be "ti,usbhs-host"
6 - reg: should contain one register range i.e. start and length
7 - ti,hwmods: must contain "usb_host_hs"
11 - num-ports: number of USB ports. Usually this is automatically detected
15 - portN-mode: String specifying the port mode for port N, where N can be
16   from 1 to 3. If the port mode is not specified, that port is treated
18 	"ehci-phy",
19         "ehci-tll",
20         "ehci-hsic",
21         "ohci-phy-6pin-datse0",
22         "ohci-phy-6pin-dpdm",
23         "ohci-phy-3pin-datse0",
24         "ohci-phy-4pin-dpdm",
25         "ohci-tll-6pin-datse0",
26         "ohci-tll-6pin-dpdm",
27         "ohci-tll-3pin-datse0",
28         "ohci-tll-4pin-dpdm",
29         "ohci-tll-2pin-datse0",
30         "ohci-tll-2pin-dpdm",
32 - single-ulpi-bypass: Must be present if the controller contains a single
35 - clocks: a list of phandles and clock-specifier pairs, one for each entry in
36   clock-names.
38 - clock-names: should include:
40   * "usbhost_120m_fck" - 120MHz Functional clock.
43   * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
44   * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
45   * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
46   * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
47   * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
48   * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
49   * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
50   * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
51   * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
52   * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
53   * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
54   * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
55   * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
56   * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
58 Required properties if child node exists:
60 - #address-cells: Must be 1
61 - #size-cells: Must be 1
62 - ranges: must be present
66 The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
67 See Documentation/devicetree/bindings/usb/generic-ehci.yaml and
68 Documentation/devicetree/bindings/usb/generic-ohci.yaml.
73 	compatible = "ti,usbhs-host";
76 	#address-cells = <1>;
77 	#size-cells = <1>;
81 		compatible = "ti,ohci-omap3";
83 		interrupt-parent = <&gic>;
88 		compatible = "ti,ehci-omap";
90 		interrupt-parent = <&gic>;
96 	port1-mode = "ehci-phy";
97 	port2-mode = "ehci-tll";
98 	port3-mode = "ehci-phy";