Lines Matching +full:max77693 +full:- +full:flash
1 Maxim MAX77693 multi-function device
3 MAX77693 is a Multifunction device with the following submodules:
4 - PMIC,
5 - CHARGER,
6 - LED,
7 - MUIC,
8 - HAPTIC
14 - compatible : Must be "maxim,max77693".
15 - reg : Specifies the i2c slave address of PMIC block.
16 - interrupts : This i2c device has an IRQ line connected to the main SoC.
19 - regulators : The regulators of max77693 have to be instantiated under subnode
23 regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER
29 - haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
30 users with tactile feedback. PWM period and duty-cycle are varied in
34 - compatible : Must be "maxim,max77693-haptic"
35 - haptic-supply : power supply for the haptic motor
37 - pwms : phandle to the physical PWM(Pulse Width Modulation) device.
43 - charger : Node configuring the charger driver.
45 - compatible : Must be "maxim,max77693-charger".
48 - maxim,constant-microvolt : Battery constant voltage in uV. The charger
53 Valid values: 3650000 - 4400000, step by 25000 (rounded down)
56 - maxim,min-system-microvolt : Minimal system voltage in uV.
57 Valid values: 3000000 - 3700000, step by 100000 (rounded down)
60 - maxim,thermal-regulation-celsius : Temperature in Celsius for entering
66 - maxim,battery-overcurrent-microamp : Overcurrent protection threshold
68 Valid values: 2000000 - 3500000, step by 250000 (rounded down)
71 - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for
78 - led : the LED submodule device node
80 There are two LED outputs available - FLED1 and FLED2. Each of them can
86 - compatible : Must be "maxim,max77693-led".
89 - maxim,boost-mode :
95 LEDS_BOOST_OFF (0) - no boost,
96 LEDS_BOOST_ADAPTIVE (1) - adaptive mode,
97 LEDS_BOOST_FIXED (2) - fixed mode.
98 - maxim,boost-mvout : Output voltage of the boost module in millivolts.
99 Valid values: 3300 - 5500, step by 25 (rounded down)
101 - maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired
103 to flash power consumption.
104 Valid values: 2400 - 3400, step by 33 (rounded down)
108 - led-sources : see Documentation/devicetree/bindings/leds/common.txt;
109 device current output identifiers: 0 - FLED1, 1 - FLED2
110 - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
112 15625 - 250000, step by 15625 (rounded down)
114 15625 - 500000, step by 15625 (rounded down)
115 - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
118 15625 - 1000000, step by 15625 (rounded down)
120 15625 - 1250000, step by 15625 (rounded down)
122 15625 - 625000, step by 15625 (rounded down)
123 - flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
124 Valid values: 62500 - 1000000, step by 62500 (rounded down)
127 - label : see Documentation/devicetree/bindings/leds/common.txt
130 - max77693-muic :
133 - compatible : "maxim,max77693-muic"
136 #include <dt-bindings/leds/common.h>
138 max77693@66 {
139 compatible = "maxim,max77693";
141 interrupt-parent = <&gpx1>;
146 regulator-compatible = "ESAFEOUT1";
147 regulator-name = "ESAFEOUT1";
148 regulator-boot-on;
151 regulator-compatible = "ESAFEOUT2";
152 regulator-name = "ESAFEOUT2";
155 regulator-compatible = "CHARGER";
156 regulator-name = "CHARGER";
157 regulator-min-microamp = <60000>;
158 regulator-max-microamp = <2580000>;
159 regulator-boot-on;
164 compatible = "maxim,max77693-haptic";
165 haptic-supply = <&haptic_supply>;
167 pwm-names = "haptic";
171 compatible = "maxim,max77693-charger";
173 maxim,constant-microvolt = <4200000>;
174 maxim,min-system-microvolt = <3600000>;
175 maxim,thermal-regulation-celsius = <75>;
176 maxim,battery-overcurrent-microamp = <3000000>;
177 maxim,charge-input-threshold-microvolt = <4300000>;
181 compatible = "maxim,max77693-led";
182 maxim,boost-mode = <LEDS_BOOST_FIXED>;
183 maxim,boost-mvout = <5000>;
184 maxim,mvsys-min = <2400>;
186 camera_flash: flash-led {
187 label = "max77693-flash";
188 led-sources = <0>, <1>;
189 led-max-microamp = <500000>;
190 flash-max-microamp = <1250000>;
191 flash-max-timeout-us = <1000000>;