Lines Matching +full:tcb +full:- +full:timer

1 * Device tree bindings for Atmel Timer Counter Blocks
2 - compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon".
4 - reg: Should contain registers location and length
5 - #address-cells: has to be 1
6 - #size-cells: has to be 0
7 - interrupts: Should contain all interrupts for the TC block
10 - clock-names: tuple listing input clock names.
13 - clocks: phandles to input clocks.
15 The TCB can expose multiple subdevices:
16  * a timer
17    - compatible: Should be "atmel,tcb-timer"
18    - reg: Should contain the TCB channels to be used. If the
19      counter width is 16 bits (at91rm9200-tcb), two consecutive
25 	tcb0: timer@fff7c000 {
26 		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
27 		#address-cells = <1>;
28 		#size-cells = <0>;
32 		clock-names = "t0_clk", "slow_clk";
34 		timer@0 {
35 			compatible = "atmel,tcb-timer";
39 		timer@2 {
40 			compatible = "atmel,tcb-timer";
46 	tcb1: timer@fffdc000 {
47 		compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
48 		#address-cells = <1>;
49 		#size-cells = <0>;
53 		clock-names = "t0_clk", "slow_clk";