Lines Matching +full:vdd +full:- +full:1
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
11 - Sylwester Nawrocki <s.nawrocki@samsung.com>
14 The S5C73M3 camera ISP supports MIPI CSI-2 and parallel (ITU-R BT.656)
26 maxItems: 1
29 maxItems: 1
31 clock-names:
33 - const: cis_extclk
35 clock-frequency:
39 standby-gpios:
40 maxItems: 1
43 vdda-supply:
46 vdd-af-supply:
49 vddio-cis-supply:
52 vddio-host-supply:
55 vdd-int-supply:
58 vdd-reg-supply:
61 xshutdown-gpios:
62 maxItems: 1
66 $ref: /schemas/graph.yaml#/$defs/port-base
71 $ref: /schemas/media/video-interfaces.yaml#
75 data-lanes:
77 - const: 1
78 - const: 2
79 - const: 3
80 - const: 4
83 - compatible
84 - reg
87 - $ref: /schemas/spi/spi-peripheral-props.yaml#
88 - if:
90 - spi-max-frequency
93 # The SPI node is simplified firmware-transfer interface only
95 clock-names: false
96 standby-gpios: false
97 vdda-supply: false
98 vdd-af-supply: false
99 vddio-cis-supply: false
100 vddio-host-supply: false
101 vdd-int-supply: false
102 vdd-reg-supply: false
103 xshutdown-gpios: false
107 - clocks
108 - clock-names
109 - standby-gpios
110 - vdda-supply
111 - vdd-af-supply
112 - vddio-cis-supply
113 - vddio-host-supply
114 - vdd-int-supply
115 - vdd-reg-supply
116 - xshutdown-gpios
117 - port
122 - |
123 #include <dt-bindings/gpio/gpio.h>
126 #address-cells = <1>;
127 #size-cells = <0>;
129 image-sensor@3c {
132 clock-frequency = <24000000>;
134 clock-names = "cis_extclk";
135 standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;
136 vdda-supply = <&cam_vdda_reg>;
137 vdd-af-supply = <&cam_af_reg>;
138 vddio-cis-supply = <&ldo9_reg>;
139 vddio-host-supply = <&ldo18_reg>;
140 vdd-int-supply = <&buck9_reg>;
141 vdd-reg-supply = <&cam_io_reg>;
142 xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
146 remote-endpoint = <&csis0_ep>;
147 data-lanes = <1 2 3 4>;
154 #address-cells = <1>;
155 #size-cells = <0>;
157 image-sensor@0 {
160 spi-max-frequency = <50000000>;
161 controller-data {
162 samsung,spi-feedback-delay = <2>;